1)  in situ Silica
					
	
					
				
				
	
					
				原位生成SiO2
			
					2)  in-situ generated nanosilica
					
	
					
				
				
	
					
				原位生成纳米SiO2
			
					3)  In-situ Synthesis
					
	
					
				
				
	
					
				原位生成
				1.
					Study of in-situ synthesis of TiB_2by laser cladding and its microstructure;
					
					
						
						
					
						激光熔覆原位生成TiB_2及其组织结构研究
					2.
					The carburising reaction of V to form VC take place under solid phase sintering at 850 ℃, and the in-situ synthesis VC particulate is fine, so the size is smaller than 0.
						
						讨论了烧结温度对VC颗粒大小和分布的影响,在850℃固相烧结时,钒的碳化反应能够完成,而且VC颗粒不易长大,原位生成小于0。
					3.
					Studies of microstructure on the coating by scanning electronic microscope(SEM),electron probe microzone analysis(EPMA) show that in-situ synthesis of TiB2 and TiB major ceramic phases disperse homogeneously in the γ-Co based alloy.
						
						结果表明,涂层中原位生成的TiB2和TiB陶瓷颗粒相均匀分布在γ-Co基合金涂层中。
					
					4)  in-situ
					[英][,ɪn 'sɪtju:]  [美]['ɪn 'sɪtju]
					
	
					
				
				
	
					
				原位生成
				1.
					Microstructure and tensile properties of in-situ titanium matrix composites;
					
					
						
						
					
						原位生成(TiBw+TiCp)/Ti复合材料的高应变速率超塑性
					2.
					Joiningsofseveralceramicsandcomposites(SiC,CandCf/SiC)athightemperatureviaprecursor (silicone resin, SR249) -infiltration-pyrolysis process and in-situ nano-ceramicgrains reinforced ceramic-metal (SiC-Ti) gradient materials for joining of ceramic andmetal have been firstly studied in this dissertation.
						
						本文为解决陶瓷及其复合材料之间以及与金属之间的高温连接问题,率先开展了用先驱体(硅树脂SR249)转化法对多种陶瓷及复合材料(SiC、C及C_f/SiC)之间的高温连接研究,用聚碳硅烷(PCS)转化原位生成纳米陶瓷相增强的陶瓷-金属(SiC-Ti)梯度材料实现对陶瓷与金属的连接。
					
					5)  in situ
					
	
					
				
				
	
					
				原位生成
				1.
					Reinforcement of EVA by sodium methacrylate prepared in situ;
					
					
						
						
					
						原位生成甲基丙烯酸钠补强EVA的研究
					2.
					In situ Formation of TiB_2 Particles and the Effect of TiB_2 Particles on the Microstructure and Properties of Al Alloy;
						
						TiB_2粒子的原位生成及对铝合金组织与性能的影响
					
					6)  in situ formation
					
	
					
				
				
	
					
				原位生成
				1.
					Thermodynamics and kinetics are applied to study the in situ formation of titanium diboride in Cu?B?Ti during sintering.
						
						通过对Cu B Ti粉末在机械合金化和烧结过程中结构变化的分析 ,研究了Cu B Ti体系原位生成TiB2 的热力学和动力学 ,并建立了反应生成TiB2 的微观反应机制 。
					2.
					The pinciple of the in situ formation of TiB and TiC reinforcements in Ti is analysed.
					
					
						
						
					
						分析了增强体TiB和TiC在Ti中的原位生成原理,研究了利用B4C粉末与海绵Ti混合熔炼制备钛基复合材料的技术。
					补充资料:原位
		分子式:
CAS号:
性质:源于拉丁语。指在原来的,正常、自然的部位或位置。
		
		CAS号:
性质:源于拉丁语。指在原来的,正常、自然的部位或位置。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条