1) thin-wall tube
薄壁管件
1.
The general realization process of hydroform simulation was introduced through taking the thin-wall tube as study object.
以薄壁管件为研究对象介绍液压仿真的一般实现过程,在计算机上预测了初始液压成形工艺方案可能产生的缺陷,提出了液压成形工艺方案的改进措施。
2) Featheredge
[英]['feðəredʒ] [美]['fɛðə,rɛdʒ]
薄壁小口径管件
4) thin-walled part
薄壁零件
1.
Based on it,a dynamic force model for milling process of thin-walled parts is established using a two-freedom elastic-damping system by considering the dynamic characteristics of the tool subsystem and the workpiece subsystem.
在此基础上,采用两自由度弹性-阻尼系统,建立了适合薄壁零件的综合考虑刀具子系统和工件子系统动态特性的动态铣削力模型。
5) Thin-wall parts
薄壁零件
1.
This paper analyses the relation between the cutting force and cutting depth in the course of belt grinding,builds the mathematics model of optimum cutting parameter to improve efficiency and intensity,and proposes the processing method for controlling griding precision of rotary thin-wall parts.
通过实验分析了带轮磨削过程中切削力和切削深度之间的关系，从提高切削效率和强度出发，选择优化切削参数，建立了切削参数数学模型；提出了控制回转形薄壁零件磨削精度的加工方
2.
As to the problem of cutting chatter found in the course of thin-wall parts milling,a theoretical model with regard to milling charter was established to conduct modal analysis experiments and milling experiments with a view to obtaining dynamic performance parameters of the system and milling force coefficient.
针对薄壁零件在铣削加工过程中存在的切削颤振问题,建立了铣削颤振理论模型,进行模态分析试验和铣削加工试验,获取系统动态性能参数和铣削力系数。
3.
The causes of deformation,size out-of-tolerance and collidings of the annular thin-wall parts produced by copper alloy extrusion materials are analyzed,and through production experiment,the reasonable process has be determined,which can reduce the production cost and improve product quality.
分析了利用铜合金挤压材加工环状薄壁零件生产过程中产生变形、尺寸超差、磕碰的原因,并通过生产实验确定了合理的加工工艺路线,降低了生产成本,提高了产品质量。
6) thin-wall part
薄壁件
1.
Magnetorheological fixture,one of the flexible fixture,could apply to the process of the thin-wall part.
本文讨论了磁流变液的一些性质,以及以磁流变夹具作为柔性夹具中的一种,在薄壁件加工中进行应用,并对夹紧力与铣削力进行了分析。
2.
The design method and die characteristics of blanking die for thin-wall part were introduced.
介绍了薄壁件冲裁模的设计方法及模具特点,对薄壁件冲裁模的设计方案进行了分析、比较,阐述了采用复合模进行冲裁的合理性,对设计各种薄壁件冲裁模的设计者和模具生产厂家可起到一个参考作用。
3.
The finite element model of milling machining errors of a thin-wall part is established by the large finite element analysis software ALGOR V20.
本文运用了大型有限元分析软件ALGOR V20建立了薄壁件铣削加工变形的有限元分析模型,通过铣削加工动态载荷模拟的方法,对薄壁件的受力变形进行了预测。
补充资料：次大口径成品油管道(见大口径原油管道)
次大口径成品油管道(见大口径原油管道)
small big inch products pipeline
次大口径成品油管道比m“，。彬duet、pipeline)见大。径原油管道。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条