1.
Fabrication of Porous Al2O3 Ceramic Using Different Pore-Making Agent
利用不同造孔剂制备Al_2O_3多孔陶瓷
2.
Effect of Additives on Properties of SiC Preforms
造孔剂对SiC多孔预制块性能的影响
3.
PREPARATION OF POROUS HYDROXYAPATITE COATING WITH GLUCOSE AS PORE PRODUCER
以葡萄糖为造孔剂制备多孔羟基磷灰石涂层
4.
RESEARCH ON THE PROCESS,INTENSITY AND PORE SIZE CONTROL OF POROUS CERAMICS BY SPACE-HOLDER METHOD
添加造孔剂法制备多孔陶瓷及其强度与孔径控制
5.
Porous bioglass material was prepared by attempting to add pore former.
尝试采用添加造孔剂的方法制备了多孔生物玻璃材料。
6.
Research on Process and Properties of Open Cell Aluminum Foams by the Space-holder Method;
粉末冶金—添加造孔剂法制备开孔泡沫铝及其性能研究
7.
The effect of mechanics of different pore former on the properties of low weight high insulation sintering product
不同成孔机理造孔剂对轻质保温烧结制品性能的影响
8.
The Effect of Mechanics of Different Pore Former on the Properties of Fly-ash and Shale Sintering Product
不同成孔机理造孔剂对粉煤灰页岩烧结制品性能影响
9.
Fabrication of SiOC Ceramic Foam with Silicon Resin and Polyvinyl Butyral
以PVB为造孔剂采用硅树脂制备泡沫陶瓷
10.
Effects of pore-forming material NH_4F and nitridation temperature on synthesis of 12H (AlN-polytypoid)
造孔剂NH_4F和氮化温度对合成12H(AlN-多型体)的影响
11.
Effect of pore-forming agents on mechanical properties of metal-bonded diamond wheels
造孔剂对金属结合剂金刚石磨具力学性能的影响
12.
Study on the Amount of Pore-former in Anode Substrates of Solid Oxide Fuel Cell
固体氧化物燃料电池阳极基底造孔剂含量的研究
13.
Effect of Organic Binder in Screen-printing TiO_2 Paste on Dye-sensitized Solar Cells
染料敏化太阳能电池丝网印刷浆料中有机造孔剂对电池性能的影响
14.
pore volume of porous packing
多孔填充剂的孔体积
15.
Pore-forming effect of different inorganic ammonium salts applied on vitrified bond CBN wheels
不同无机铵盐对陶瓷结合剂CBN砂轮造孔的应用研究
16.
Pimhole: A small, unwanted, transparent area in a photo graphic film emulsion; due to dust on copy, copyboard glass or film.
针孔:因原稿、稿架玻璃或菲林上的灰尘而造成菲林乳剂上一些细小、无用的透明小点。
17.
orificing the coolant
对冷却剂加孔板节流
18.
Study of Fabricating Metal Material with Contact-Porous by Technique of Wiping off Salt from Sintered Product of Metal and Salt by Melting or Solution;
熔、溶脱盐造孔法制备金属通孔多孔材料研究