1.
3D FE Analysis on Deformation Mechanism and Laws of Multi-pass Spinning of Large Complex Thin-walled Shell;
大型复杂薄壁壳体多道次旋压成形机理及规律的三维有限元分析
2.
Research on Forming Mechanism of Multi-Pass Conventional Spinning Process and Influence of Roller-trace on the Process;
多道次普通旋压成形机理与旋轮运动轨迹作用的研究
3.
Finite Element Simulation of Process for Multi-Cycle Spinning and Pulley Spinning
多道次拉旋及皮带轮旋压成形工艺的有限元模拟研究
4.
Experiment Study on Spinning Trail of Pipe in Integral Mandrel-less Roller
整体无心轴托辊管体旋压道次的试验研究
5.
The Spineorbit Coupling Items Influence on the sequence of the Multimode Energy Levels;
自旋轨道耦合因子对多重态能级次序的影响
6.
Multi Cycle Spinning Thickness Reductior Rate Study and Optimization of Processing Parameter
多道次拉旋减薄率研究及工艺参数优化
7.
" Multipolar and two-speed electrical resolvers, general specification for"
GB/T10404-1989多极和双通道旋转变压器通用技术条件
8.
Development and Research on New Type Multi-Channel Rotary Press Filter
新型多通道旋转挤压脱水机的开发与研究
9.
Suppression of multiples by improved expanding multi-channel match minus method.
利用改进的扩展多道匹配相减法压制多次波
10.
multi-turn rotary actuator
多次旋转式执行机构
11.
Research on the Effect of Process and Material Parameters on Multi-Pass Conventional-spinning;
工艺和材料参数对多道次普旋成形影响规律的研究
12.
Research on 3-D Elasto-plastic FEM Numerical Simulation of Multi-process Neck Spinning of Tube;
筒形件多道次普通缩旋三维弹塑性有限元模拟研究
13.
Recrystallization behavior of 7050 aluminum alloy during multi-pass hot compression process
多道次热压缩过程中7050铝合金的再结晶行为
14.
Roadway Supporting Technology Influenced by Mining and Protective Pillar Design
多次动压影响巷道支护技术及护巷煤柱留设
15.
Static analysis and design optimization of the dewatering disk of a multi-channel rotary press filter
多通道旋转挤压脱水机脱水圆盘静力分析及优化设计
16.
Experimental Study on Multipass Equal Channel Angular Pressing of Pure Al Sintered Material
纯铝粉末烧结材料多道次等通道转角挤压的实验研究
17.
Yangtze and Huaxia continental blocks together formed uniform South China plate after many times tension and compression during the Caledonian Cycle.
加里东旋回经多次拉张、挤压后,扬子陆块与华夏陆块拼合形成统一的华南板块;
18.
Swirl number calculation in the inlet of spinning ramjet assisted range projectile
旋转冲压增程弹进气道内流场旋流数计算