1.
Study of Springback for Design of the Tool in Big Sheet Metal Forming;
大型板材弯曲模具设计中补偿弯曲回弹变形的研究
2.
The Construction Design of the Bending Die for Improving the Surface Finish of Parts;
提高工件表面质量的弯曲模结构设计
3.
Profile design for stretch bending die of extrusions considering springback
考虑弯曲回弹的拉弯模外形设计方法
4.
Finite Element Simulation for Laser Curve Forming of Sheet Metals;
板料激光曲线弯曲成形的有限元模拟
5.
EXPERIMENTAL STUDY ON THE FLEXURAL STRENGTH OF FINE GRAIN ETHANOL MODEL ICE
细粒酒精模型冰的弯曲强度试验研究
6.
Mechanical model and analysis of casing bucking in horizontal wells
水平井套管弯曲力学模型与计算分析
7.
Study on Variational Principles of Springback for Bending and Its Numerical Simulation;
弯曲回弹变分原理及其数值模拟研究
8.
Characterization and Modeling for Bending Behaviour of Yarns and Fabrics in-Situ;
纱线与织物同机弯曲表征及建模分析
9.
Experimental Study and Simulation on Laser Bending of Tubes;
管材激光弯曲成形的试验与模拟研究
10.
Simulation and Experiments of Laser Bending of Silicon Sheet;
硅片激光弯曲成形的数值模拟及试验
11.
Numerical Simulation of Laser Bending 1Cr17Ni2 Stainless Steel;
1Cr17Ni2不锈钢板料激光弯曲成形数值模拟
12.
Experimental Investigation of Flow Fields in the Curved Common Carotid Artery in Vitro;
弯曲颈总动脉内流场的模拟实验研究
13.
Modeling and Simulation for Bending Stress Analysis of Transmission Gears
变速器齿轮弯曲应力分析建模与仿真
14.
Bending Calculation of Bimodulous Circular Plate under Concentrated Loads
集中载荷作用下双模量圆板弯曲计算
15.
Numerical simulation of flow properties in curving gas vitta
天然气流经弯曲油管柱时的流场模拟
16.
Design of progressive die for the bending sheet based on UG_PDW
基于UG_PDW的弯曲片级进模具设计
17.
The Establishment of the Finite Element Model for Spiral Tube
螺旋盘管弯曲成形有限元模型的建立
18.
Fiber Loop Ring-down Spectroscopy(FLRDS) in Multimode Fiber Bending Loss Measurement
应用FLRDS技术测量多模光纤的弯曲损耗