1.
Investigation of Semi-Solid Welding of SiCp/6061Al Composites;
SiCp/6061Al复合材料半固态焊接研究
2.
Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy
快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织
3.
Microstructure and Solidification Mode of Welding Joint of Cr15Mn9Ni1N Stainless Steel
Cr15Mn9Ni1N不锈钢焊接接头的组织及凝固模式
4.
EXPERIMENTAL STUDY ON THE STRENGTHENED COMPOSITE BEAM JOINTED WITH WELDED SHORT REBAR
焊接短筋连接的加固组合梁试验研究
5.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
6.
horizontal fixed position
固定横向焊位置(指管子环形接头横向焊
7.
Welding Quality Thermal Control System With Resistance Welder for Narrow Lap Welding
窄搭接电阻焊机的焊接质量热态控制系统
8.
Three lead wires are soldered to the anchor terminals.
在固定接线端子上焊有三根导线。
9.
New Technology of Solidoid Jointing Stir Friction Welding
固相连接新技术——搅拌摩擦焊技术
10.
Research of the Fatigue Test of Welded Steel Structure Reinforced by CFRP;
CFRP加固焊接钢结构疲劳试验研究
11.
FE Analysis of Welded Steel Beam Strengthened by CFRP
CFRP加固焊接工字钢梁的有限元分析
12.
Study on Reinforcing Methods for Welded Tubular Joints Structures
焊接管节点结构的加固方法研究(英文)
13.
Microstructural characteristic of rapid solidification welding joint of melt-spun Cu-Sn peritectic alloy foils
急冷Cu-Sn合金的快速凝固焊接接头组织特征
14.
Welding residual stresses of cover-plate retrofitted steel moment connections
梁柱刚接节点盖板加固的焊接残余应力分析
15.
Submerged arc welding procedures of large-scale intersection and modeling of welding gun gesture
大型相贯线埋弧焊接工艺研究及焊枪姿态建模
16.
Preparation and welding performance of amorphous interlayer alloys for TLP bonding
TLP焊用非晶态中间层合金的制备及焊接性能
17.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
18.
Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.
连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。