1.
Analysis of Welding of Natural Gas Emptying Riser with Low Temperature 16MnDR Steel Plates
16MnDR低温钢天然气放空立管焊接分析
2.
Low alloy steel plates for low temperature pressure vessels
GB3531-1996低温压力容器用低合金钢钢板
3.
light gauge cold formed steel structural member
低温成形轻量型钢构件
4.
A Study on Cryogenic Toughness of Super Low Carbon 9Ni Steel Welding Joint
超低碳9Ni钢焊接接头低温韧性研究
5.
Results show that the temperature drop in the process of tapping can be dramatically checked by lowering the tapping temperature, minimizing the tapping time and raising the temperature of ladle lining.
研究结果表明，降低出钢温度、短出钢时间、高钢包内衬温度可显著减少出钢过程钢水温降。
6.
Control of Fracture Toughness at Low Temperature for X80 Line-pipe Steel Plates Whit Heavy Thickness
厚规格X80管线钢钢板的低温断裂韧性控制
7.
Modeling the temperature-dropping pattern of the ultra-low-carbon finishing stands in the 2~(nd) hot-rolling plant at Wisco
武钢二热轧超低碳钢精轧机组温降模型的建立
8.
Technical regulation for steel low temperature pressure vessels
钢制低温压力容器技术规定
9.
A typical cryogenic liquid cylinder is depicted in Fig. 2.
典型的低温液体钢瓶如图2所示。
10.
Effect of ESR on Cryogenic Toughness of Austenitic Steel
电渣重熔对奥氏体钢低温韧性的影响
11.
Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;
应变强化奥氏体不锈钢低温容器研究
12.
Influence of Metallurgy Quality on Impact Toughness of Low Temperature Cast Steel;
冶金质量对低温铸钢冲击韧性的影响
13.
Research on Improving the Low Temperature Impact Toughness of 09CuPCrNi-A H-beam;
提高09CuPCrNi-A耐候H型钢低温冲击韧性研究
14.
Experimental Research of High Temperature Strength of Low-alloyed Structural Steel Q345;
Q345低合金结构钢的高温强度试验研究
15.
Welding Test of Cryogenic 3.5 Ni Steel Pipe;
低温用3.5Ni钢管的焊接性试验研究
16.
Study on Tensile Behaviour under Low Temperture and Stess Relaxation of 60Si2Mn Steel
60Si2Mn钢低温拉伸及应力松弛行为研究
17.
Welding Process Research of K60 Pipeline Steel in the Low-temperature Environment
低温环境下K60管线钢焊接工艺研究
18.
Grain Boundary Martensite Formation and Tempering Brittleness at Low Temperature of Steels
钢的晶界马氏体形成与低温回火脆性