1.
Influence of Silicon/Glass-ceramic Anodic Bonding Technology on Bonding Intensity
硅/微晶玻璃阳极键合工艺对键合强度的影响
2.
ELECTRICAL PROPERTIES OF Li_2O-Al_2O_3-SiO_2 GLASS-CERAMICS USED AS ANODIC BONDING MATERIAL
阳极键合用Li_2O-Al_2O_3-SiO_2微晶玻璃电学性能
3.
Investigation on Anodic Bonding Influence Factors and Preparation of Glass-creamic Used as Anodic Bonding;
阳极键合用微晶玻璃的制备及键合影响因素研究
4.
Design of High Voltage Pulse Power for Anodic Bonding and Study on the Processing Property of Bonding;
阳极键合高压（脉冲）电源设计及键合工艺特性分析
5.
Microstructure and Mechanical Property of the Anodic Bonding Interface between Solid Electrolyte Glass (Ceramics) and Metals;
玻璃（陶瓷）与金属阳极键合界面结构及力学性能
6.
Reasons and Influencing Factors of dark region on the bongding substrate
阳极键合后基片呈现黑斑原因及影响因素
7.
Investigation on the Mechanism and Microstructure and Mechanical Properties of the Anodic Bonding for the Pyrex Glass to Metals;
Pyrex玻璃与金属阳极键合机理及界面结构和力学性能的分析
8.
Analysis on the Interface Structure and Finite Element Simulation of the Anodic Bonding for the Pyrex Glass to Aluminum;
Pyrex玻璃与铝阳极键合界面结构及残余应力模拟分析
9.
Preparation of LAS Glass-ceramic and Investigation on Anodic Bonding Performance and Technical Parameters;
LAS系统微晶玻璃的制备及阳极键合性能与工艺参数关系的研究
10.
Electrical/Thermal Properties and Crystallization Kinetics of RAS Glass-ceramics for Anodic Bonding
阳极键合用RAS系微晶玻璃电学/热学性能及其析晶动力学研究
11.
Influence Factors Research and Design Factors Analysis on Anode linkage Technology in MEMS Packaging
MEMS封装中阳极键合技术的影响因素研究和设计因素分析
12.
Microstructure and mechanisms of the interface between borosilicate glass and silicon by anodic bonding
硼硅玻璃与硅阳极键合机理及其界面微观结构分析
13.
aluminium base alloy sacrificial anode
铝基合金防蚀消耗阳极
14.
Magnesium alloy sacrificial anode
GB/T17731-1999镁合金牺牲阳极
15.
Soluble zinc and insoluble low carbon steel anodes are used for alkaline zinc-cobalt plating.
碱性锌钴合金电镀常采用锌阳极和低碳钢阳极。
16.
Composite Cathode and Anodic Current Collecting Problem of Intermediate-Temperature SOFC;
中温型SOFC复合阴极和阳极汇流问题的研究
17.
Anodizing of aluminium and aluminium alloys-Determination of the fastness to ultraviolet light of coloured anodic oxide coatings
GB/T12967.4-1991铝及铝合金阳极氧化着色阳极氧化膜耐紫外光性能的测定
18.
Anodizing of aluminium and its alloys--Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
GB/T14952.1-1994铝及铝合金阳极氧化阳极氧化膜的封孔质量评定磷-铬酸法