1.
R＆D of New Type Marine Agglomerated Flux for SAW with Large Heat Input;
船用大线能量埋弧焊新型烧结焊剂的研制
2.
Development of High Strength and High Toughness Sintered Flux Used in X80 Grade SSAW Pipe
X80级螺旋埋弧焊管用高强度高韧性烧结焊剂的研制
3.
Fluxless Soldering Technology for High Power Laser Diode
大功率激光二极管无助焊剂烧焊技术
4.
ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC
无烧结助剂SiC陶瓷的高压烧结研究
5.
A Study of Interconnection Reliability for Low-temperature Sintered Nano-silver Paste;
纳米银焊膏低温烧结粘接可靠性研究
6.
Sintering and Mechanical Property of Si_3N_4 with YF_3 Sintering Aid
YF_3助烧剂氮化硅的烧结及力学性能
7.
A substance applied to a surface to be joined by welding, soldering, or brazing to facilitate the flowing of solder and prevent formation of oxides.
焊剂施于熔接或焊接以防止氧化、促进焊面结合的物质
8.
Influences of Sintered Technologies and Additives on Properties of Aluminum Oxide Ceramic;
烧结工艺及烧结助剂对氧化铝陶瓷性能的影响
9.
The Influences of Different Additives on Pressureless Sintering of Si_3N_4 Ceramics;
不同烧结助剂对氮化硅常压烧结的影响
10.
Influence of BBSM sintering aid on the properties for PTC thermistor ceramics sintered at low temperature
BBSM烧结助剂对低温烧结PTCR陶瓷性能的影响
11.
Application of SYP in Sintering Practice at Yongtnog Company
烧结增效剂(SYP)在永通公司烧结生产中的应用
12.
Research progress of low-temperature sintering aids of AlN ceramic
低温烧结氮化铝陶瓷烧结助剂的研究进展
13.
The igniter combustion often produces hot condensed particles.
这种点剂燃烧常常产生热的凝结颗粒。
14.
Experiment study on AlN ceramics low-temperature sintering aids
氮化铝陶瓷低温烧结助剂体系的研究
15.
Combustion Characteristics of Small Grain-Binding High-Burning-Rate Propellant;
小球粘结高燃速推进剂燃烧特性研究
16.
Influence of sintering additive (Dy_2O_3) on the bending strength of PcBN
烧结助剂(Dy_2O_3)对PcBN抗弯强度的影响
17.
MA Effect on the Structure and the Sinter Capabilities of Fe-Cu Metal Bond;
MA对Fe-Cu系金属结合剂结构和烧结性能的影响
18.
The sintering curves showed that the protective agents could effectively suppress the sintering.
烧结曲线也显示，保护剂对粉末的烧结有抑制的效果。