1.
Charpy V-notch toughness
夏比v型缺口冲击韧性
2.
Method of testing in toughness of wood
GB/T1940-1991木材冲击韧性试验方法
3.
Test method for impact toughness of high performance ceramics
GB/T14389-1993工程陶瓷冲击韧性试验方法
4.
Test method for impact toughness of ceramic floor tiles
GB/T2584-1981陶瓷地砖冲击韧性试验方法
5.
Influence of Metallurgy Quality on Impact Toughness of Low Temperature Cast Steel;
冶金质量对低温铸钢冲击韧性的影响
6.
Research on Improving the Low Temperature Impact Toughness of 09CuPCrNi-A H-beam;
提高09CuPCrNi-A耐候H型钢低温冲击韧性研究
7.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究
8.
Reason Analysis on Low The Impact Toughness of L450 Pipeline Steel
管线钢L450冲击韧性低原因分析
9.
Analysis of Factors Influencing H13 Mandrel Steel's Impact Toughness
影响H13芯棒钢冲击韧性的因素分析
10.
Technological Test for Improving the Impact Toughness of Quenched and Tempered Steel Forgings
提高调质钢锻件冲击韧性的工艺试验
11.
Study on revision model of the wood toughness with moisture content
木材冲击韧性含水率修正模型的研究
12.
Analysis on Reasons of Low Impact Toughness at -40℃ of Q345E Big Size H-beam
Q345E大H型钢-40℃冲击韧性偏低原因分析
13.
Analysis of the relationship between impact toughness and fracture toughness for rail steel
低温下铁道钢轨钢材冲击韧性与断裂韧性的关系分析
14.
Microstructural Stability and Its Influence on Impact Energy in 1Cr21Ni5Ti Duplex Stainless Steel
1Cr21Ni5Ti双相不锈钢组织稳定性及对冲击韧性的影响
15.
Meanwhile the optimal welding parameter which was suitable for welding line impact toughness was gained by analysis on the test result of impact toughness and microstructure.
通过对冲击韧性的测试结果与微观组织的分析,确定出使焊缝冲击韧性最佳的焊接工艺参数。
16.
Steel bonded tungsten carbides-Determination of impact toughness
GB/T10419-1989碳化钨钢结硬质合金冲击韧性的测定
17.
Test method of impact toughness of cemented carbides at room temperature
GB/T1817-1995硬质合金常温冲击韧性试验方法
18.
Effects of Ni Content and Heat Treatment on Impact Toughness of QT400-18L at Low Temperature;
含镍量及热处理对QT400-18L低温冲击韧性的影响