1.
The Development and Application of High-temperature Fume Preheating Technology on the 75kA Aluminum Reduction Cell;
高温烟气焙烧技术在75kA预焙槽上的开发应用
2.
TECHNICAL AND ECONOMIC ANALYSIS OF THE CONVERSION FROM SODERBERG CELLS INTO THE CENTER POINT FEEDING PREBAKED CELLS IN THE SAME CAPACITY;
自焙槽改造为同级中间点式下料预焙槽的技术经济分析
3.
Optimized model and template for anode exchange sequence of prebaked anode cell
预焙槽阳极更换顺序表的优选模型和模板
4.
open prebaked anode type cell
敞开式预焙阳极电解槽
5.
Study on the Life of GL 190kA Prebaked Aluminum Reduction Cells;
GL190kA预焙铝电解槽槽寿命问题研究
6.
Technique code for retrofitting soderberg cell into prebaked anode cell in aluminium smelters
自焙阳极铝电解槽预焙化改造技术规范
7.
In-depth Characteristics Extraction of Cell Voltage Fluctuation in Aluminum Reduction Cells
大型预焙铝电解槽槽电压波动特征提取
8.
Spectral analysis of cell voltage fluctuation in 320 kA pre-baked aluminum reduction cells
320kA系列预焙铝电解槽槽电压波动的频谱解析
9.
Experimental Application of Pre-baked Slot Anode in 300 kA Aluminum Smelting Pot
预焙沟槽阳极在300kA铝电解槽上的试验与应用
10.
The Research of Fault Diagnosis System for 350kA Pre-baked Aluminum Reduction Cell;
350kA预焙铝电解槽故障诊断系统的研究
11.
The Study of the Enlarge of Current in 160KA Cell;
160KA预焙铝电解槽强化电流试验研究
12.
The Simulation of the Flow Field of 300kA Large Scale Prebaked Aluminum Electrolysis Cell
300kA预焙阳极铝电解槽流场的仿真
13.
Energy Saving Operation of 300 kA Prebaked Aluminum Smelting Pot
300kA预焙铝电解槽节能生产经验
14.
Discussion on the technology of increasing the current of large prebaked cell
大型预焙铝电解槽强化电流技术探讨
15.
The controller is applied to realize the control of pre-baked aluminium electrolytic cell temperature.
利用该控制器实现对预焙铝电解槽的温度控制。
16.
Study on Design and Optimization of the Electric-Magnetic Field of Large Prebaked Aluminum Reduction Cells;
大型预焙铝电解槽电磁场设计与优化研究
17.
The Simulation of the Thermal-electric Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽热电场的仿真
18.
The Research on Optimize of Large Pre-baked Anode Cell Process Technical Conditions;
大型预焙铝电解槽工艺技术条件优化试验