1.
For the design of hydraulic pressure. extreme temperature that may occur in use should be considered as design since the hydraulic preddure have a certain relation with temperature.
由于耐水压与温度有关，所以在设计时应考虑可能达到的最高温度。
2.
Seamless, non-shrinkage, wearing-resistant, anti-scar, pressure proof, impact-proof, temperature-resistant, acid ＆ alkali resistant, water-proof and corrosion resistant engineering materials.
无缝、不收缩、耐磨、耐刮、耐压、耐冲击、耐温、耐酸碱、防水、防蚀工程材料。
3.
testing method for water resistance of cloth:low range hydrostatic pressure method
织物耐水度测试法：低水压法
4.
testing method for water resistance of coated cloth; high range, hydrostatic pressure method
织物耐水度测试法：高水压法
5.
Effect of water absorption on the water resistance of autoclaved fly ash bricks
吸水率对蒸压粉煤灰砖耐水性的影响
6.
Long-term Induced Over-voltage Test of 800kV Step-up Transformer of Laxiwa Hydropower Station
拉西瓦水电站800 kV升压变压器长时感应耐压试验
7.
Methods of test for enamelled wires--Resistance to transformer oil in the presence of water
GB/T4074.23-1983漆包线试验方法耐含水变压器油试验
8.
Study on Manufacture Technology of Composite Tropedo Shells under High Hydrostatic Pressure;
某型水雷复合材料耐外压壳体制造技术研究
9.
Study on the Life of the Water Hydraulic Control Valves and Malfunction Analysis;
纯水液压控制阀耐久性实验研究与故障分析
10.
Further Investigation of High Electrical Breakdown for Water Dielectric;
水介质耐高电压击穿技术的进一步研究
11.
Mechanical Properties and Durability of Extruded Fiber Reinforced Cement Mortar Board and Its Composite Beam
挤压纤维增强水泥板及复合梁抗弯与耐久性能
12.
The Effect Correlative Factors on Lightning Withstand Level of UHV A.C. Transmission Line
特高压交流输电线路耐雷水平相关因素研究
13.
Technical specifications of material of pressure hull structure for submersibles and underwater equipments
GB/T11632-1989潜水器和水下装置耐压结构材料技术条件
14.
Technical specifications of manufacture of pressure hull structure for submersibles and underwater equipments
GB/T11631-1989潜水器和水下装置耐压结构制造技术条件
15.
Water seal of high temperature resisting material isolates spring working parts from water during relief.
在泄压时,耐高温材料的水密封部件将水与其它活动部件隔离开来
16.
Sintering as a whole offers resistance against friction, pressure and corrosion, with long service life.
整体烧结，耐磨耐压耐腐，使用寿命长。
17.
compressive strength, compression strength
抗压强度,耐压强度
18.
Decorative laminated sheets based on thermosetting resins--Determination of resistance to immersion boiling water
GB/T7911.3-1987热固性树脂装饰层压板耐沸水煮性能的测定