1.
Method of testing in bending strength of wood
GB/T1936.1-1991木材抗弯强度试验方法
2.
testing method of bending strength of fire brick
耐火砖抗弯强度试验方法
3.
Test method for measuring flexure strength of silicon slices
GB/T15615-1995硅片抗弯强度测试方法
4.
Influence of sintering additive (Dy_2O_3) on the bending strength of PcBN
烧结助剂(Dy_2O_3)对PcBN抗弯强度的影响
5.
Effect of Ni on Bending Strength of Corrosion Resistance Fe-8.8B Alloy in Melting Zinc
Ni对耐熔锌合金Fe-8.8B抗弯强度的影响
6.
Flexural strength and elasticity decreased significantly with increasing wood content.
4．含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
7.
STUDY ON LITTLE DEFLECTION IN MEASUREMENT OF FLEXURE STRENGTH FOR SILICON WAFER
硅片抗弯强度测试方法中小挠度问题研究
8.
Size Effect of Length on Flexural Strength of Chinese Fir Dimension Lumber Used in Wood Structure
木结构用杉木规格材抗弯强度的长度尺寸效应
9.
Experimental Study of Inelastic Buckling Strength and Stiffness Requirements for Longitudinally Stiffened Panels
纵向加劲板非弹性抗弯强度和刚度试验研究
10.
Test method for flexure strength of impermeable graphite materials
GB/T13465.2-1992不透性石墨材料抗弯强度试验方法
11.
testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
耐火砖和绝热耐火砖抗弯强度试验方法
12.
Additionally, the fracture surfaces of bending strength specimen were also explained.
此外，还对抗弯强度试样的断口进行了分析。
13.
Stress Wave Method to Detect Veneer's Modulus of Rapture;
单板抗弯强度冲击应力波检测法的研究
14.
High strength performance： the anti-striking force of tempered glass of the same thickness is3-5 times than that of the common glass.
高强度：同等厚度的钢化玻璃抗冲击强度是普通玻璃的3-5倍，抗弯强度是普通玻璃的2~倍。
15.
The study on the reinforcement of filling amount of potassium titanate whisker on the bending strength of dental composite resin
钛酸钾晶须的填充量对其增强牙用复合树脂抗弯强度的影响
16.
Potassium titanate whisker modified by silane coupling agent to enhance the bending strength of dental composite resin
硅烷偶联剂的用量对钛酸钾晶须增强复合树脂的抗弯强度的影响
17.
Evaluate the effect of different heat-cure time on the flexural strength of the resins reinforced by potassium titanate whiskers
热处理时间对钛酸钾晶须增强牙用复合树脂的抗弯强度的影响
18.
THE EFFECT OF SURFACE CONDITION OF HARDENED PM HSS ON ITS BENDING STRENGTH
试样表面状态对淬硬粉末冶金高速钢抗弯强度的影响