1.
The Plating Ration and Life-Span Study of Acidic System and High Phosphorus Solution of Electroless Plating;
酸性体系高磷镀层化学镀液镀速与寿命的研究
2.
Talking about Chinese galvanized sheet development from quick increase of its production capacity in the world;
从世界镀锌板能力迅速增加看我国镀锌板发展
3.
The Effects of Rapid Thermal Annealing on the Crystalline Phases of Zinc-Magnesium Alloy Film Prepared by Vacuum Evaporation
快速退火对真空镀锌镁合金镀层晶相的影响
4.
Factors Affecting the Deposition Rate of Poised Electro-Brush Plated Nickel Coating
脉冲电刷镀镍中沉积速度的影响因素
5.
High-speed Determine of Gold in Gold-plated Solution and Exhausted Wash Liquid
镀金溶液与漂洗废液中金的快速测定
6.
Rapid Determination of Micro Cobalt in New Bright Sn-Pb-Co Alloy Plating Bath
新型光亮镀锡铅钴合金镀液中微量钴的快速测定
7.
at is concluded that by this process bright Zn plating can be provided with high deposition rate, low cost and reliable quality.
结论是本工艺可镀出全光亮的锌镀层、沉积速度快、成本低,质量稳定。
8.
Comparative Analysis of Zinc Coat and Zn-Al Alloy Coat in Highway Fence
高速公路隔离栅热浸镀锌和锌铝合金镀层的对比分析
9.
Effect of Plating Parameters on Plating Rate and Thickness as well as Surface Morphology of Electroless Tin Coating
化学镀锡工艺参数对沉积速率、镀层厚度及表面形貌的影响
10.
Nano PTFE in Ni composite coatings by high speed jet electrodeposition
纳米PTFE粒子细化高速电喷镀镍基复合镀层的组织
11.
It was proved thet the pooperties of the bath is stable,the deplsition rate is considerably high,the edposited layer possess fairly high hardness and good adhesive power to the substrate.
试验结果表明:镀液性能稳定,镀层沉积速度快,镀层硬度高、质量好、结合强度大。
12.
Effects of composition in solution and process conditions on deposition rate were studied.
研究了镀液组成及操作条件对沉积速率的影响。
13.
Research of Accelerated Corrosion Test of Zinc,CadmiumCoating on High-strength Steel
高强度钢表面镀锌、镉层加速腐蚀试验研究
14.
A Research on the New Technique for Rapid Stripping of Cu/Ni/Cr Deposits
快速退除铜/镍/铬等金属镀层新工艺的研究报告
15.
Report on the First Phase of the Experiment in the Rapid Graphitizing of Malleable Cast Iron By"Hot Soaking-Plating in the Liquid of Metal"
可锻铸铁热浸镀快速石墨化试验第一阶段报告
16.
High Speed Acidic Electroplating Technology of Compact and Bright Sn and Sn-Cu Alloy for Copper Wire
铜线材酸性高速电镀致密光亮锡、锡铜合金
17.
Research on High-Speed Drilling and Marking Laser Instrument for ETL Line of Cold Rolling;
冷轧镀锡生产线高速激光孔标仪的研制
18.
A Study on the Methodology of Rapid Manufacturing Metal Die by Metal Plating;
金属喷镀法快速制作金属模具方法研究