1.
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个相同锌镀层厚度)
2.
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
级别、电镀方法、镀层质量及常用称号
3.
Safeguard of Solution and influence of Impurities for Non- Cyaniding Silver Electroplating
无氰镀银溶液的维护及杂质对镀层质量的影响
4.
Effect of Cathode Current Density on Quality of Ni-W Alloy Coating
阴极电流密度对电镀Ni-W合金镀层质量的影响
5.
Relative quantifying technique to measure mass of fission plate in a fission chamber
裂变室镀层质量厚度的相对测量技术
6.
EXISTENCE OF 1,4-BUTANEDIOL IN BRIGHT Ni-BATH AND ITS EFFECT ON THE BATH AND PLATING
亮镍镀液中的1,4-丁二醇及其对镀液性能和镀层质量的影响
7.
Effects of pH values on the quality of plated Ni-W alloy coating
pH值对镍钨合金镀层电镀质量的影响
8.
Effect of temperature on the quality of electro-deposited Nickel-Tungsten coating
温度对镍钨合金镀层电镀质量的影响
9.
Control and Research on Surface Quality of Galfan Alloy Coating with Single Hot-dipping on Steel Wire;
单镀Galfan合金钢丝镀层表面质量的控制与研究
10.
Effect of Cr~(3+) on Performance of Cr Plating Solution & Cr Plating Layer Quality;
三价铬对镀铬液性能及镀铬层质量的影响
11.
Evalution on Surface Quality of n-Al_2O_3/Ni-P Composite Electroless Plating
n-Al_2O_3/Ni-P化学复合镀镀层表面质量评价
12.
Effects of NiSO_4 content in plating bath on the quality of Ni-W alloy coating
镀液中硫酸镍浓度对镍钨合金镀层电镀质量的影响
13.
Steel product--Zinc coating mass testing method
GB/T1839-1993钢铁产品镀锌层质量试验方法
14.
It was proved thet the pooperties of the bath is stable,the deplsition rate is considerably high,the edposited layer possess fairly high hardness and good adhesive power to the substrate.
试验结果表明:镀液性能稳定,镀层沉积速度快,镀层硬度高、质量好、结合强度大。
15.
Lower water vapor partial pressure during processing for higher quality, better adhesion and more reproducible deposition.
、改善镀膜的质量，提高薄膜的附着力和多层镀膜能力。
16.
at is concluded that by this process bright Zn plating can be provided with high deposition rate, low cost and reliable quality.
结论是本工艺可镀出全光亮的锌镀层、沉积速度快、成本低,质量稳定。
17.
Applications of GDS's QDP in Analizing Zinc Plate
辉光光谱法在镀层产品质量研究中的应用
18.
Effect of Sodium Dodecyl Sulfate on the Quality of Electroless Ni-P Coating of Terylene Cloth
十二烷基硫酸钠对涤纶化学镀镍层质量的影响