1.
Weld studs for capacitor discharge welding
GB/T902.3-1989储能焊用焊接螺柱
2.
Study on Capacitor Discharge Welding of Al_2O_3 Fibre Reinforced Al-Matrix Composites;
Al_2O_3纤维增强铝基复合材料储能焊研究
3.
Microstructure of Welded Joint of 0Cr18Ni9 Stainless Steel by Capacitor Discharge Welding
0Cr18Ni9不锈钢储能焊接头微观组织分析
4.
Microstructural formation of austenitic stainless steel joint by capacitor discharge welding
奥氏体不锈钢储能焊接头组织形成规律
5.
Microstructures and properties of capacitor discharge welding joint of Al_2O_3 particle reinforced Al-matrix composites
Al_2O_3颗粒增强铝基复合材料储能焊接头微观组织及性能
6.
Capacitance Pulsation Welding on PLC Control;
基于PLC控制的电容储能脉冲焊机
7.
Develop of Waveform Control Inverter and Capacitor Discharge Spot Welding Machine;
波形控制的逆变式电容储能点焊机的研制
8.
MECHANICAL TEST OF DOMESTIC 9%NI STEEL USED IN LNG CRYOGENIC STORAGE TANK
LNG储罐用国产9%Ni钢焊接接头力学性能试验
9.
Verify that income and used welding consumables and its store controlling status conformed to the specification requirements, e. g. chemical analysis and mechanical properties of welding electrodes etc.
核查焊材及其存储控制状况是否符合标准要求，比如焊条等的化学分析及机械性能。
10.
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
11.
Design of a Data Acquisition and Storage System Based on a Single Chip
钢轨气压焊参数的单片机采集与存储
12.
Welding Heat Simulation Experiment of High Input Energy Welding Steel Plate for Oil Storage
大型原油储罐用钢的焊接热模拟试验
13.
Study on the application of double wire submerged arc welding in the construction of crude oil storage tank
双丝埋弧焊在原油储罐施工中的应用
14.
Welding technology of the material 9Ni steel alloy used in LNG cryogenic storage tank
9Ni钢大型LNG低温储罐的焊接施工
15.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
16.
GMAW short-arc tack welds shall not be incorporated into the root pass.
熔化极气体保护焊-短弧点焊焊缝不能与根部焊道合成一体。
17.
Study on Transverse Welding Process with Pulsed Submerged Arc Welding Technology and Its Application in Oil Tank Manufacturing;
脉冲埋弧横焊工艺研究及其在石油储罐焊接制造中的应用
18.
Welding Analysis and Research on Matching Welding Materials for Q460E Steel;
Q460E焊接性能分析及匹配焊材研究