1.
Study on Healing of Interior Crack-type Fault in Heavy Forging by Modeling;
大型锻件内裂纹缺陷修复的物理模拟研究
2.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
3.
Effect of the Water Pressure Inside the Crack on the Fracture Behavior of Concrete Gravity Dam;
裂纹内水压对重力坝断裂特性影响的研究
4.
Prediction of Burst Strength of Oil Well Casing Strings with Micro-Cracks
含微裂纹油井套管的抗内压断裂强度预测
5.
Effect of in-crack water pressure distribution on the fracture behavior of concrete gravity dams
裂纹内水压分布对重力坝断裂特性的影响
6.
The st udy shows that the coupled elastic and electric fields inside piezoelectric med ia depend on the speed of the crack propagation, and have singularity at the cr ack tip.
研究表明 :介质内的耦合场与裂纹运动速度有关 ,在裂纹尖端有奇异 ;
7.
Subsurface Crack Initiation and Propagation Mechanism in GCr15 Steel;
GCr15钢内部裂纹萌生和扩展机理的研究
8.
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
9.
Surface crack analysis of inner hole of titanium alloy centrifugal impeller
TC11钛合金离心叶轮内孔裂纹分析
10.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
11.
Mechanical Cause and Safe Crack Scale Estimation of Transverse Crack on Tube Inner Surface
身管内表面横纹萌生的力学成因及安全裂纹尺度估计
12.
Internal defects:lack of penetration,lack of fusion,slag,gas pole,carck,overheating.
内部缺陷：未焊透、未熔合、夹渣、气孔、裂纹、过热。
13.
THE STRESS INTENSITY FACTOR OF A PENNY SHAPE CRACK EMBEDDED IN THE FIBER OF THE COMPOSITE MATERIAL
复合材料纤维内含圆盘状裂纹的应力强度因子
14.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析
15.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Circumferential Part-Throughwall Cracks;
含内表面环向裂纹光滑管弹塑性有限元分析
16.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Axial Inside Surface Cracks;
光滑弯管沿轴向内表面裂纹弹塑性有限元分析
17.
Pipe Corrosion Cracking with Ultrasonic Detection Signal Processing Research;
管道腐蚀裂纹超声内检测信号处理研究
18.
CORRELATION STUDY OF THE CRACK-TIP CONSTRAINT EFFECT FOR TEST SPECIMENS AND INTERNAL-PRESSURE PIPELINES
试件和内压管道裂纹端约束效应的相关性分析