1.
Microstructure and Properties of an Nb-Cr Based Multi Element Alloy;
Nb-Cr系多元合金的微观组织及性能研究
2.
Influence of Heat Treatment on Mechanical Property of Ti-Nb-Cr-Al Alloy
热处理对Ti-Nb-Cr-Al系钛合金力学性能的影响
3.
Compostion Design and Microstructure Control of New Type Fe-Cr-Mo-V-Nb Heat Strength and Corrosion Resistance Steel
新型Fe-Cr-Mo-V-Nb系热强耐蚀钢的成分设计与组织控制
4.
Heating Simulation about Metallography and Impant Ductility of Welding Heat Affected Zone of Cr-Nb X80 Pipeline Steel
Cr-Nb系X80管线钢焊接热影响区组织和性能的热模拟
5.
Hot Deformation Behavior of Zr-Sn-Nb-Fe-Cr Alloy
Zr-Sn-Nb-Fe-Cr合金热变形行为
6.
Joining of Recrystallized SiC Ceramic Using Ni-Cr-Nb Powders as Filler
采用Ni-Cr-Nb焊料连接再结晶SiC陶瓷
7.
Microstructure and Properties of In-Situ Synthesized Nb-Cr-Ti/C Surfacing Welded Metal
原位复合(Nb-Cr-Ti)C堆焊金属的组织与性能
8.
Effect of Nb and Cr on microstructure and properties of low C and low Si cold-rolled high strength dual-phase steels
Nb和Cr对冷轧低碳低硅双相钢组织性能的影响
9.
Flexible Control of Dual Phase Microstructure and Properties of C-Si-Mn-Cr-Nb Steel
C-Si-Mn-Cr-Nb钢双相组织性能的柔性控制
10.
FlexNet NT/NB Series Node (GPS Only)
FlexNet nt/NB 系列节点(GPS Only)
11.
Microstructures of Si-Cr co-depositing coatings prepared on Ti-Nb-Si based ultrahigh temperature alloy
Ti-Nb-Si基超高温合金Si-Cr共渗抗氧化涂层的显微组织
12.
The Research of Nb-Cr X80 Steel Pipe Microstructure and Performance Under Different Intensity Match
X80级Nb-Cr钢管不同强度匹配下的接头组织与性能研究
13.
Deformation behaviour of Fe-Co-B-Si-Nb-Cr bulk amorphous alloy during nanoindentation
Fe-Co-B-Si-Nb-Cr块体非晶合金在纳米压痕过程中的变形行为
14.
The Application of Worklist in KONICA Computed Radiography System
Worklist在KONICA CR系统中的应用
15.
Influence of Cr and Nb on Defects and d-d Electron Interactions in TiAl Alloys Researched by Positron Annihilation Techniques
用正电子湮没技术研究Cr和Nb对TiAl合金中缺陷和d-d电子相互作用的影响
16.
Connection for the FlexNet NT/NB Series Node Power Supply,
用于 FlexNet nt/NB 系列节点电源、
17.
Connection for the FlexNet NT/NB Series Node RF Module
用于 FlexNet nt/NB 系列节点 RF 模块的连接
18.
Connection for the FlexNet NT/NB Series Node Transponder
用于 FlexNet nt/NB 系列节点应答器的连接