1.
Analysis on Metallurgical Effect of Refine Deep Desulphurization Hot Metal at Converter in Masteel
马钢转炉冶炼深脱硫铁水的冶金效果分析
2.
Metallurgical Effect of Converter Smelting with Deep-Desulphurizing Hot Metal at Masteel
马钢120t转炉冶炼深脱硫铁水的冶金效果
3.
Metallurgical Effects Test for Reuse of Ladle Top-slag after Refining
精炼后钢包顶渣重复使用冶金效果试验
4.
Development of Compound Basic Shielding Flux for Tundish and Its Metallurgical Effect
复合型碱性中间包覆盖剂的研制及其冶金效果
5.
Mathematical Simulation and Configuration Optimization of H Beam Steel Tundish
H型钢连铸中间包冶金效果分析与结构优化
6.
Study on the Metallurgical Effects of Electric Pulse Acted on Molten Steel in Tundish
中间包钢液施加电脉冲的冶金效果研究
7.
Study on Flow Control Devices and Metallurgical Effect in a 5-Strand Billet Caster Tundish at Chonggang;
重钢五流方坯连铸中间包控流装置及冶金效果的研究
8.
Numerical and physical simulation on inner structure optimization of a continuous casting tundish and its metallurgical effect
连铸中间包内部结构优化的数理模拟及冶金效果
9.
As a result, tundish current regulator can efficiently prevent short current flow and improve metallurgical result of tundish.
结果表明,使用中间包稳流器能有效地防止短路流,改善中间包冶金效果。
10.
The experiments suggest that both bottom and bottom side argon blowing techniques provide better metallurgical effects than top blowing process, obtaining steel quality satisfactory to continuous casting requirements.
结果表明，底侧吹氩和底吹氩工艺的冶金效果均优于顶吹氩工艺，钢水质量均能满足连铸要求。
11.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
12.
Technical Research and Application Effect on Reutilization of Comprehensive Wastewater in Metallurgical Industry
冶金工业综合废水回用技术研究与应用效果
13.
thermal balance and thermal efficiency of furnaces inmetallurgical industry
冶金炉热平衡和热效率
14.
The instrument had been applied in professional experiments in metallurgy industry, and satisfactory effect is gained.
该仪器已经在冶金专业实验中使用并取得了满意的效果。
15.
Evaluation of Occupational Hazard Control in a Electric Smelting Enterprise
某电冶企业职业病危害控制效果评价
16.
Smelting Process and Its Results of Clean Steel Used for 1000 MW Nuclear Power Tube Plate
1000MW核电管板用纯净钢的冶炼及效果
17.
Synthesis Economic Benefit Analysis of 3H-TRT in Blast Furnace
冶金高炉应用3H-TRT综合经济效益分析
18.
Analysis of Wear-failure of Surface Metallurgy Coatings and Countermeasures
表面冶金涂层的磨损失效形式与对策