1.
Study on Neutral Point Protection without Grounding for 220 kV Transformer
220kV不接地变压器中性点绝缘保护研究
2.
The electrical isolation of cathodic protected pipelines
阴极保护管道的电绝缘标准
3.
27 Parts connected by protective impedance shall be separated by double insulation or reinforced insulation.
应采用双重绝缘或加强绝缘将由保护阻抗连接的各个部件隔开。
4.
Research of closed insulation relay JMX-5 type of the small bus terminal
全封闭绝缘JMX-5型继电保护小母线端子的研究
5.
Research on Protective Distance of 220kV GIS Substation
220kV气体组合绝缘变电站避雷器保护距离的研究
6.
Packing: Teflon or graphite packing protected from low temperatures by a column of insulating gas.
填料：通过保温绝缘气体来保护聚四氟乙烯或石墨免受低温影响。
7.
A protective or insulating layer fixed to the outside of a building or another structure.
覆面固定到一座建筑物或其它结构上的保护层或绝缘层
8.
Overvoltage protection and insulation coordination design guide for hydropower station
水力发电厂过电压保护和绝缘配合设计技术导则
9.
Measuring insulation resistance and reliability test protection device for main switchboard(emergency switchboard).
总配电板（应急配电板）绝缘电阻测量和保护装置可靠性试验。
10.
Investigation on Mechanical Property of Operating Mechanism and Insulation Performance of Arc-quenching Chamber for SF_6 Generator Protection Circuit Breaker;
SF_6发电机保护断路器机构运动特性及灭弧室绝缘性能研究
11.
Application of Mobile Lightning Protector and Matching Insulation Technology in Power Supply System
外移式防雷保护与绝缘配合技术在通钢供电系统的应用
12.
isolator (-ter)
绝缘体;绝缘体;绝缘物;绝缘物;绝缘子;绝缘子
13.
rubber-insulated sheathed ordinary flexible cord
橡皮绝缘护套通用型软线
14.
The Insulation Inspection Method for Submarine Cable Sheath of Hainan Grid Interconnection Project
海南联网海底电缆护套绝缘监测方法
15.
If the insulation is to be as well protected after it is reduced, the arrester rating must be correspondingly reduced.
若绝缘减少后仍同样地能被保护,那末避雷器额定值也必须相应降低。
16.
"also, provide a protective sleeve that allows operation of the valve without breaking the vapor seal or disturbing the insulation."
此外,还要配置保护性套管,使得操作阀门时不会破坏气体密封或绝缘性能。
17.
A flexible wire or group of wires with insulating and damage-protecting external cover as used to carry signals or electric current.
由一条或相互绝缘的多条导线和保护套构成的传输线，用于传送信号或电流。
18.
The entire wound stator assembly shall receive a minimum of two coats of insulating varnish utilizing a dip and bake process.
整个缠绕定子总装应该采用保护层沉浸烘烤涂镀法,用绝缘清漆至少覆盖两层。