1.
Ascent Admeasure Aftermath Accuraey and Authenticity Approach of Accidence Study
提高测量结果准确度和可靠性方法的初探
2.
The result indicted that the reactant content reduced did not affect the exact extent of the analysis, and the phenomena was very distinctness in the end point.
实验表明,降低反应物浓度不影响分析结果准确度,终点现象明显。
3.
Comparison of three methods in the accuracy verification in clinical chemical analytes
三种临床化学检测项目测量结果准确度验证方法的比较
4.
Evaluation of Uncertainty for the Calibration Results of ASTM D1500 Colorimeter
ASTM D1500色度计校准结果的不确定度评定
5.
Uncertainty Evaluation for the Results from the Preparation of Cadmium Standard Solution
镉标准溶液配制结果的不确定度评定
6.
Fluctuations in temperatures put their results oat by a mile.
由于温度起伏不定，他们的测验结果很不准确。
7.
Fluctuations in temperature put their results out by a mile.
由于温度起伏不定，他们测验的结果很不准确。
8.
Evaluation of uncertainty in measurement for CL302C calibrator;
CL302C型多功能校准器测量结果的不确定度评定
9.
Uncertainty evaluation of measure result of 14～150mm standard ring gauge
14～150mm标准环规测量结果的不确定度评定
10.
Uncertainty Evaluation of Result Measured by Current Transformer Standard Equipment
电流互感器标准装置测量结果的不确定度评定
11.
Evaluation and Validation of Measuring Results Uncertainty in the Standard Electrical Energy Measurement Equipment
电能计量标准测量结果的不确定度评定与验证
12.
The Evaluation of Measurement Uncertaintyfor Watt-hour Meter Calibration Device
电能表标准装置测量结果不确定度评定
13.
Your calculation is accurate and correct.
你的计算结果准确无误。
14.
Evaluation of Expanded Uncertainty of Relative Humidity Calibration with Digital Thermo-hygrometer
数字温湿度计相对湿度校准结果的扩展不确定度评定
15.
Evaluation of Uncertainty in Calibration Results for Second-class Standard Platinum and Rhodium 10-Platinum Thermocouple
二等标准铂铑_(10)-铂热电偶校准结果不确定度评定
16.
The degree of system error size in test results were reflected by the examination accuracy.
检验准确度反映检验结果中系统误差大小的程度。
17.
The results showed that the analytical precision and accuracy of the method were better than those obtained with the conventional method for low absorbance samples.
结果表明，对于低吸光度样品的测定，该法较普通分光光度法准确。
18.
The experimental results showed that the measurement accuracy and precision are favorable.
回收率实验和精密度实验的结果表明,该方法的准确度和精确度良好。