1.
Research on the Corrosion Mechanism of Galvanization Vessel and Its Resistent Zinc Coatings;
锌锅腐蚀机理及耐锌蚀防护层的研究
2.
Mathematical Model for Hot Dip Galvanizing Strips Temperature at Entrance of Zinc Pot
镀锌生产带钢入锌锅温度数学模型的建立
3.
Accurate Control Technique of Free Aluminum in the Zinc Pot of the Hot Dip Galvanizing Line
热镀锌机组锌锅有效铝含量精确控制技术
4.
"In the zinc pot, on the strip surface a zinc coating is formed by reaction of steel surface with molten zinc. "
在锌锅中,铁与熔融的锌反应,在带钢表面形成锌的镀层。
5.
The strip is turned by sink rolls in the pot and leaves the pot in vertical position.
带钢经沉没辊垂直离开锌锅
6.
Preparation for Ceramic Coating Used in Inwall of Hot-Galvanizing Tank and Research on the Corrosion Mechanism of the Coating;
热镀锌锅内壁陶瓷涂层制备及其耐锌蚀机理的研究
7.
The Introduction of Inducting Heater of Coreless Zinc Pot for Baosteel 3# Cold Strip Rolling Mill Plant No.3 Continuous Hot Dip Galvanizing Line
宝钢分公司3号热镀锌机组无芯锌锅感应加热及控制浅析
8.
Influence of Zinc Bath Temperatrue and Hot Dip Galvanizing Time on Surface Quality for Hot Dip Galvanizing Steel Sheet
锌锅温度和浸镀时间对热镀锌钢板表面质量的影响
9.
"The top of furnace nose is connected with turn roll room by a flange, the bottom of furnace nose is immersed in zinc pot, and the immersed part of the nose is made of special alloy steel."
炉鼻顶部用法兰和转向辊室相联接,底部浸入锌锅,浸入锌锅部分由特殊合金钢制成。
10.
The Pushbutton Panel controls the motorized and pneumatic powered functions of the equipment in the pot area.
按钮柜控制锌锅区设备的电机及气动设备。
11.
Analysis of Potential Danger about Zinc Boiler for Manufacturing Electricity Transmission Towers
输变电铁塔生产用锌锅的潜在隐患分析
12.
The speedy cooled strip is equalized here to the temperature accepted by zinc pot.
使经快速喷射冷却的钢板温度均匀一致,达到钢板入锌锅的温度。
13.
The annealed strip is cooled to the temperature required by galvanizing process in the cooling zone and then goes into zinc pot through sealed channel.
将退火带钢在冷却段冷却到指定温度,经密封通道进入锌锅。
14.
The turn roll of 600mm in diameter is mounted on the exit of turn roll room to guide strip into zinc pot.
为将带钢引入锌锅,在出口转向辊室装有一个直径为600mm的转向辊
15.
The structures properties and situation of energy consumption of metal galvanizing pan and ceramic galvanizing pan are introduced.
介绍了金属类及陶瓷类锌锅的结构、性能及能量消耗情况。
16.
The Main Control Desk controls the motorized and pneumatic powered function of the pot area equipment plus the air supply system from the operator's pulpit.
控制室主控制台控制锌锅区设备及空气供给系统的电机驱动及气动装置。
17.
"To achieve good quality heavier coatings, srip roughness and pot chemistry must be appropriate for the combination of coating weight and line speed."
为取得良好的厚镀层,钢带粗糙度和锌锅内金属成分必须适应于镀层厚度及生产线速度。
18.
Preparation and Property of Cu-Zn Alloy for Water Treatment of Boiler;
锅炉水处理用铜锌合金的制备及性能研究