1.
Properties of Stitched Composite Laminates-Fatigue Performance of Composite Laminates with an Open-hole
缝合复合材料可用性——含孔层合板的疲劳性能
2.
Stress distribution near the opening and stress concentration for composite laminates with a circular opening
含孔复合材料层合板孔边的应力集中
3.
Approximate Calculation of Stress Distribution Near Hole for Composite Laminates with Finite Width
含孔复合材料层合板孔边应力集中的近似计算
4.
Composite Laminates with Centric Hole in Static Strength;
含孔复合材料层合板的静强度破坏分析研究
5.
STUDY ON NATURAL FREQUENCY OF LAMINATES WITH CUTOUT
含孔损伤复合材料层合板固有频率研究
6.
STUDY ON NATURAL FREQUENCY OF PLAIN WOVEN FABRIC LAMINATE WITH CUTOUT
含孔损伤平面编织层合板固有频率研究
7.
Simulating Calculation of the Effect of Stitching Reinforcement on Composite Laminates with a Circular Hole
孔口缝合补强对含孔复合材料层板应力集中影响的数值模拟
8.
Free vibration characteristic of plain woven fabric laminates with multiple delaminations around a central hole
含穿孔-多分层混合损伤平面编织层合板自振特性
9.
Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Containing a Hole Under Axial Extension
含孔复合材料层合板轴向拉伸三维有限元渐进失效分析
10.
Fatigue Behavior Study of Damaged Composite Laminates
含损伤复合材料层合板疲劳特性研究
11.
The Study on the Stress Concentration Coefficient of the Composite Laminates with a Circle Hole;
带圆孔复合材料层合板应力集中系数的研究
12.
FINITE ELEMENT CALCULATION OF THE STRESS DISTRIBUTION AROUND THE HOLE IN THE COMPOSITE LAMINATES
复合材料层合板孔边应力场的有限元计算
13.
LQR-based Active Vibration Control for Laminated Plate Containing Piezo-electric Patching
含压电片层合板的LQR振动主动控制
14.
Free vibration characteristic of plain woven fabric laminates with multiple delaminations
含多分层损伤平面编织层合板的振动特性
15.
Study on Free Vibration Characteristics for Composite Laminates and Stiffened Plates with Multiple Delaminations;
含多分层复合材料层合板和加筋板的自由振动特性研究
16.
Strength Predicting Method of Composite Laminates with a Central Hole Based on FEA Simulation
基于有限元仿真的含中心孔层压板强度预测方法
17.
Compression Failure of Composite Laminates with Low-velocity Impact Damage
含低速冲击损伤复合材料层合板的压缩失效
18.
Stress of composite material plate with circular hole was analyzed by the model above.
按照所建立的计算模型对含有圆形孔的复合材料板进行应力分析。