1.
The Effect of Two Nozzles Pressure Difference on Physical Properties of Air-jet Spun Yarn
喷嘴气压差异对喷气纱强伸性能的影响
2.
Using two types nozzle newly developed, the authors succeeded in spin-ing a series of bast-fibre-blend air-jet yarns.
作者用自行设计的两种型号的喷嘴成功地纺制了一系列含麻纤维喷气纱。
3.
Development of wool/viscose/polyester three components MVS yarn and its property analysis
毛/粘胶/涤纶喷气涡流纱的开发及成纱性能分析
4.
Spinning Practice of Tencel Organic Cotton Air Jet Vortex Yarn
Tencel有机棉喷气涡流纱的试纺
5.
Physical properties of PET/PA blended air-jet textured yarns
PET/PA混纺喷气变形纱的物理性能
6.
In an air jet loom, high pressure air carries the filling yarn through the shed.
在喷气织机上,高压气流携带纬纱穿过梭口。
7.
Study on Three-dimensional Swirling Airflow and Motion of Flexible Fiber in Air-jet Spinning Nozzle
喷气纺纱喷嘴内三维旋转气流场及柔性纤维运动的研究
8.
This Paper investigates the possibility of the processing of bast fiber yarns by air-jet false-twist spinning.
本文对喷气纺纱在麻类纤维纺纱中应用的可能性进行了初步探讨。
9.
Investigation on Yarn Structure and Fabric Properties of Ai-jet Vortex Spinning;
喷气涡流纺（MVS）成纱结构及其织物性能的研究
10.
Study on Technics of Open-end Air-jet Spinning;
自由端喷气纺（MVS）的工艺研究与成纱性能分析
11.
On Problems Relating to the Development of a New Spinning Technology-Jet Spinning
关于发展喷气纺新型纺纱技术相关问题的探讨
12.
Research and Practice on bundle-filling weaving technology of air-jet loom
喷气织机束纱引纬织造技术研究与实践
13.
Development and Property Analyses of Modal Polyester Flax Air-jet Vortex Yarn
Modal涤纶亚麻喷气涡流纱的开发及性能分析
14.
Air-jet-spun yarns are clean, have good uniformity and even quality, but are less regular than ring-spun yarns.
喷气纺纱纺制的纱线光洁、条干均匀、质量稳定,但条干均匀度还赶不上环锭纱。
15.
Use:For computer weft feeding on water-jet and air-jet looms,suitable for all kinds wefts especially the weaving of fabrics with strong twisting yarn.
用途：用于喷水、喷气的单色电子储纬，适应各种纬纱特别是强捻纱的面料织造。
16.
Modern air jet looms use air guides or air guides with auxiliary jets to extend the distance that the yarn can be carried.
现代的喷气织机采用气流导路或气流导路加辅助喷嘴,目的是延长纬纱的飞行距离。
17.
The result is that usually the warp shed must be larger than that for a shuttle loom.
纬纱会弯曲,这就要求喷气织机的梭口应大于有梭织机的梭口。
18.
Analysis on the Dynamic Behavior of Back Rest System and the Control of Warp Tension for an Air-jet Loom;
喷气织机后梁系统动态行为分析与经纱张力控制