1.
Test method for longitudinal compressive properties of fiber-reinforced thermosetting plastic pipe
GB/T5350-1985纤维增强热固性塑料管轴向压缩性能试验方法
2.
Preparation and Axial Compressive Property of Small Size Thin-Wall High Temperature GFRP Bush
小尺寸薄壁耐高温玻璃钢衬套的制备及其轴向压缩性能
3.
Experimental investigation on the energy Absorption characteristic of braided composite circular tubes subjected to quasi-static axial compression
编织复合材料圆管准静态轴向压缩吸能特性的试验研究
4.
EXPERIMENTAL STUDIES ON THE AXIAL CRUSHING BEHAVIORS OF ALUMINIUM FOAM-FILLED HAT SECTIONS
泡沫铝填充帽型结构轴向压缩吸能特性的试验研究
5.
The high strain rate compressive properties of UHMWPE interlaced biaxial weft knitted composites
UHMWPE交织双轴向纬编复合材料高应变率压缩性能研究
6.
Experimental Study of Compressive Buckling for an Axial Compressible Rod
轴向可压缩压杆的压缩失稳实验研究
7.
external pressure single type axial expansion joint
外压单式轴向伸缩接头
8.
stiff shaft centrifugal compressor
刚性轴离心式压缩机
9.
flexible-shaft centrifugal compressor
挠性轴离心式压缩机
10.
Microstructure and Compressive Properties of DS NiAl-based Eutectic Alloy
NiAl基定向共晶合金的组织和压缩性能
11.
Study of a New Type Axial Compliant Mechanism in Scroll Compressors for Auto Use;
新型轴向柔性结构汽车空调用涡旋压缩机密封技术研究
12.
An Analysis of Mechanical Property of Elastic Pressure Groove on Air Radial Bearing
气体径向轴承弹性均压槽力学性能分析
13.
INVESTIGATION ON ANISOTROPY OF DYNAMIC COMPRESSIVE MECHANICAL PROPERTIES OF COLD-ROLLED Cu SHEET
冷轧Cu板动态压缩力学性能各向异性的研究
14.
Numerical Simulation of Axial Clearance Bleeding Effect on a Multistage Axial-flow Compressor Flow-field and Performance;
轴向间隙引气对多级轴流压气机性能及流场影响的数值模拟
15.
Experimental Investigations on z-direction Compression Behavior of 3D Orthogonal Woven Composites
三维正交机织复合材料厚向压缩性能试验研究
16.
The Research of Characteristics on the Scroll Compressor with Driving Bearing Set in Orbiting Scroll;
驱动轴承内嵌式涡旋压缩机特性研究
17.
Reason Analysis about the Position Where a Invalidating Section on Cast Iron is Caused by Compression along an Axes;
铸铁材料受轴向压缩失效截面位置及原因分析
18.
Condition prediction of stage seal of centrifugal compressor based on axial thrust
利用轴向力预测离心压缩机的级密封状态