1.
No spalled paint exists at the plug weld and for a short distance each side of the plug welds.
在塞焊焊缝处及塞焊周围距离内无细漆碎屑存在。
2.
Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.
对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。
3.
The spcimens were machined such that plug weld was centered on the width of the specimen.
对试件进行了机加工以使塞焊焊缝位于试件宽度中间。
4.
Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.
因此，断裂可能是由于从塞焊焊缝内的焊渣和气孔外形成的尖锐的疲劳裂纹而产生的。
5.
Auto-storehouse-assembling and plug welding for the steel wall unit with quadrate ribs
自动升降货柜波纹墙板的组装及塞焊工艺
6.
brush for cleaning spark plugs or parts to be welded
清洗火花塞或要焊接的零件用刷
7.
If too much solder is use, it may flow past tube and clog seating area.
如果采用太多的焊料，则焊料可能流过管道并阻塞密封区域。
8.
Welding to Fillet Weld Crackle of Superheater Connecting Screw Plug for 1 025 t/h Boiler
1025 t/h锅炉过热器连接管螺塞角焊缝裂纹的焊接
9.
Bearing Vibration Noise Pan Drain Plug Welding
减振降噪复合板油底壳螺塞支座的焊接
10.
Fillet welded;Screwed and plugged;Quick release;Flanged and bolted;Flanged and bolted 2
角焊;旋拧插塞式;速释;带法兰以螺栓固定;带法兰以螺栓固定 2
11.
2004 May, yearses~fill Er to incise to weld a limited company(Kun mountain) work in the plum in June, 2006.
2004年5月~2006年6月在梅塞尔切割焊接有限公司(昆山)工作.
12.
Microstructure and Mechanical Property of Friction Plug Welding Joint of 2014 Al Alloy
2014铝合金拉锻式摩擦塞补焊接头微观组织及力学性能
13.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
14.
stick feeder machine
焊丝进给自动弧焊机
15.
electrode ,metal contact, for welding machines
电焊机金属接点焊条
16.
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
17.
To close with or as if with a cork or stopper.
用塞子塞用或好象用木塞或塞子塞住
18.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4