1.
Its steel superstructure, only 3.50 meters thick, consists mainly of a comparatively flat stiffened box section beam.
桥的上部结构为钢材,厚度仅为3.50米,主要由相对扁平的箱型截面梁组成。
2.
Analysis for Prestressing of Curved Continuous Box Girder Bridges
箱型截面曲线连续梁桥的预应力分析
3.
The bents supporting the four continuous 工 beam plate girders have a cross section shaped like a box.
构架支承着四片工字型板梁，构架的截面为箱型。
4.
Hysteretic property of three connections of box-section beam with circular tubes under cyclic bending
三种构造型式的箱形截面梁与圆管连接节点受弯性能
5.
Finite Element Analysis of Skewly-Supported Continuous Box Girder Bridge with Variable Section;
斜交变截面连续箱梁桥的有限单元法
6.
ANALYSIS OF CURVED CONTINUOUS BOX-GIRDER BRIDGES WITH VARIOUS PLATE THICKNESS BY DOUBLE SPLINE SUBDOMAIN METHOD
双样条子域法分析变截面连续弯箱梁桥
7.
STATIC ANALYSIS OF STRAIGHT BOX GIRDER BRIDGES BY SPLINE SUBDOMAIN METHOD
双样条子域法分析等高度变截面连续直箱梁桥
8.
Shear Lag Effect Analysis in Box Girder of a Continuous Rigid-Frame Bridge with Varying Depth;
连续刚构桥变截面箱梁剪力滞效应分析
9.
Development of CAD System for Single Section Continuous Beam of Middle-Small Span;
中小跨径等截面连续箱梁CAD系统的开发研究
10.
Theoretical and Experimental Research on Inclined Section Bearing Capacity of Reinforced Concrete Box Beams Strengthened with CFS;
CFS加固RC箱梁的斜截面承载力分析与试验研究
11.
Transverse load distribution on box section continuous composite steel-concrete bridges
箱形截面连续组合梁桥的荷载横向分布
12.
Calculation method of the inertia torsion moment of the closed thin wall box beam
闭口薄壁箱梁截面扭转惯性矩的计算方法
13.
On construction technology of suspending irrigated variable cross-section prestressed continuous box-girder bridge
悬浇变截面预应力混凝土连续箱梁桥施工技术
14.
Technology of Concrete Whole Box Girder Prestressed Strengthening
混凝土整体截面箱形(板)梁桥预应力加固技术
15.
Design of Fully-welded Steel Plate Composite Truss Girders of Box Section Member Bar of Minpu Bridge Ⅱ,Shanghai
闵浦二桥箱形截面杆件全焊钢板组合桁梁设计
16.
The cantilever construction technique of variable cross-section prestressed concrete continuou box-girder
变截面预应力混凝土连续箱梁的悬臂施工技术
17.
Cantilever casting construction of large-span and large-cross-section continuous box girder of passenger-dedicated line
客运专线大跨度大截面连续箱梁悬臂浇筑施工
18.
The theoretical analysis and the experiment of inclined section bearing capacity for strengthening RC box girder with CFS
CFS加固RC箱梁斜截面承载力理论分析与试验