1.
Casting of Jute loom Flexible Rod with Spheroidal Draphitc Cast Iron of Low Carbon Equivalent
用低碳当量球墨铸铁铸造黄麻织机伸缩杆
2.
RESERACH ON ON-LINE DETECTION TECHNOLOGY ABOUT CARBON CONTENT IN LOW CARBON FERROCHROME
低碳铬铁碳含量在线检测技术的研究
3.
Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high--carbon steel.
根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。
4.
When levels are low, we seem to crave sweets and carbs, which raise serotonin and improve mood.
当它的含量降低时，我们似乎就会渴望糖和碳水化合物，因为它们能提高血清素含量并改善情绪。
5.
Application of Carbon Dioxide Emission Audit to the Planning of Low Carbon Cities
碳排放量评估方法在低碳城市规划之应用
6.
Pipeline Steel Carbon Content and Ceq Relation to Weldability
管线钢的碳含量和碳当量与焊接性的关系
7.
cold-rolled carbon steel
冷轧碳钢, 低碳钢
8.
The carbon content of mild steel is much lower than cast-steel.
软钢的含碳量要比铸钢的低得多。
9.
As the carbon content decreases, the steel becomes less hard and more easy to shape .
含碳量越低，钢就越软，也越容易成型。
10.
Silicon Carbide Fibers with Low Oxygen Content Prepared by Dry Spinning;
干法纺丝法制备低氧含量碳化硅纤维
11.
Total oxygen content control of ULC steel in the process of RH treatment
RH处理超低碳钢中总氧含量的控制
12.
A Model for Predicting the Total Oxygen of Steel in the Process of RH Treatment
RH处理超低碳钢中总氧含量预报模型
13.
Nitric acid has much more surface chemistry effects on the low modulus carbon fiber than high modulus one.
硝酸氧化对低模量碳纤维的表面改性远比高模量碳纤维的大。
14.
It has shown that on untreated fiber surfaces, the high modulus fiber has much less functional groups than the low modulus fiber.
研究表明，高模量碳纤维的表面化学基团含量要比低模量碳纤维的低。
15.
The product spectrum ranges from simple carbon steel and low-alloy steels to high-quality carbon steels.
产品种类范围从简单的碳钢和低合金钢到高质量的碳钢。
16.
The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated.
研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.
17.
iron having a low carbon content that is tough and malleable and so can be forged and welded.
碳含量低的铁，硬且有延展性，可以锻造和焊接。
18.
And reburning PC is finer, UBC increase is smaller.
再燃粉越细,飞灰含碳量随细度增加而降低越慢。