1.
Theoretical Analysis on Squeeze Flow of Electrorheological Fluid between Two Parallel Disks;
电流变液平行圆盘挤压流的理论分析
2.
Analysis of squeeze flow of bi-viscosity fluid between two rigid spheres
两刚性圆球间双黏度流体挤压流动压力分析
3.
Numerical Simulation of Metallic Flow Forming via Extrusion in Pocket and Porthole Dies
导流模和分流模金属挤压流动成形的数值模拟
4.
Study on Fluidity of ZL101 in Semi-solid Micro-Extrusion
ZL101铝合金半固态微挤压流动性研究
5.
Experimental research on fluidity of semi-solid alloy ZL101 mircoextrusion
ZL101铝合金半固态微挤压流动性实验研究
6.
dead metal zone
死(金属)区(挤压时模角处金属不能流动)
7.
When you close your hand and press, some of the water gets out.
当你把手握紧挤压时，会流出一些水。
8.
Research on CAD/CAE System for Porthole Extrusion Moulds of Hollow Aluminum Profiles;
空心铝型材分流组合挤压CAD/CAE研究
9.
THE HYDRODYNAMIC LUBRICATION RESEARCH ON THE PROCESS OF HYDROSTATIC EXTRUSION;
静液挤压过程中的流体动力润滑研究
10.
hydrostatic extrusio
静水压挤压;静水压挤压;静液力挤压;静液力挤压;液力静挤压
11.
New Type Extruding Die Used Panel Separate Flow Die Guide Form Technology
应用平面分流模导流成形技术的新式挤压模
12.
Extrusion force of HHE can be minimized and the disfigurement of extrusion products can be avoided when the viscosity of the medium is proper.
挤压介质的粘度是关系到坯料变形流动的润滑性能及挤压变形流动性能的关键。
13.
FEM Analysis in the Effect of Die Compression Section on Plastic Extrusion Flow
口模压缩段对塑料挤出流动影响的有限元分析
14.
Numerical Simulation Study on the Metal Flow of Continuous Extrusion for Aluminum Tubes;
铝管连续挤压金属流动的数值模拟研究
15.
Analyzing the Metal Moving and Designing the Mould in the Continuous Extrusion Extended Figuration;
连续挤压扩展成形金属流动分析与模具设计
16.
Research on Metal Flow Regularity of Extrusion Process for the Large-scale Aluminum Material;
大型铝型材挤压过程中金属流动规律的研究
17.
Design of DC Electromotor′s Speed Governing System of Twin-screw Extruder;
双螺杆挤压机直流电机调速系统的设计
18.
The Extrusion Effect and The Adsorption Effect in Personnel Flow between Society and Government;
社会与政府间人事流动的挤压与吸纳效应