1.
Utilizing a state of the art process of controlled thermal treatment for hardening and tempering.
先进的可控气氛热处理生产线对产品进行调质处理。
2.
The Application of Integrative Solution Heat Treatment Machine for Stainless Steel Panel
不锈钢管屏整体固溶热处理生产线的应用
3.
Power consumption quota and its counting and testing method in heat treating production
GB/T17358-1998热处理生产电耗定额及其计算和测定方法
4.
Discussion of steel wire direct drawing production without intermediate heat treatment
钢丝无中间热处理直接拉拔生产探讨
5.
The Application of the Glass Homogenizer Heat Treatment Technology on Production
玻璃均质热处理技术在生产上的应用
6.
Study on Clean Water-based Quenching/tempering Medium for Textile Steel Ring Travelers;
纺纱钢丝圈热处理清洁生产技术及工艺研究
7.
Study of Networked Production Mode Application in Chongqing′s Heat-Treatment Industry;
重庆市热处理行业网络化生产模式的探讨
8.
Thermodynamic Solution for the rate of Entropy Production in Irreversible Process;
不可逆过程熵产生率的热力学处理方法
9.
RESEARCH ON DIFFERENT HEAT TREATMENT OF SKIMMILK ON PRODUCTION PROCESS OF COTTAGE CHEESE
不同热处理原料乳对农家干酪生产工艺的影响
10.
Weld Thermomechanical Treatment with Roller Compaction and It's Application in Coiled Tubing Manufacture
焊缝碾压形变热处理在连续管生产中的应用
11.
Study on suppression of senescent spotting in ripened banana with heat treatments
热处理对催熟香蕉老化斑点产生的抑制研究
12.
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
13.
The thermal load produced by heat exchange and thermal radiation is determined by the weather condition, strueture and the shade disposal of the greenhouse.
热传导和热辐射产生的热火负荷取决于天气情况、室结构和温室的遮荫处理等。
14.
The remaining 20%of the acetylene production is principally used for oxyacetylene cutting, heat treating, and welding.
乙炔生产的剩余20%主要用于氧乙炔切割、热处理和焊接。
15.
Production choosing β titanium alloy after heat treatment could increase the high temperature intensity and wear off with hardness of HRC42.
选择β钛合金材质生产，经热处理后增加高温强度及耐磨性，硬度HRC42。
16.
The thermal process is a function of the decimal reduction time (D)and the thermal resistance constant (Z)for the microbial population in the product.
产品中微生物数量的D值和Z值也是热处理强度的函数。
17.
Straightening of the shaft after heat treatment is a key process.
在轴杆类零件生产过程中,热处理后校直是一道关键工序。
18.
Productive Heat Treatment Company Ltd. [formerly a subsidiary company of Hong Kong Productivity Council]
丰盛热处理有限公司〔前为生产力促进局附属公司〕