1.
Based on the adiabatic compression theory,adiabatic pulse compression using the nonlinearity-increasing fiber is suggested and investigated.
从脉冲绝热压缩的理论出发,提出一种利用非线性递增光纤实现脉冲绝热压缩的新方案。
2.
Determination of the Index and Temperature of the Adiabatic Compression Process for Real Gases
实际气体绝热压缩过程指数及终温的确定
3.
Avoid conditions that can result in high temperatures, such as adiabatic compression, from the rapid pressurization of a system.
避免可能导致来自系统迅速加压的高温的条件，如绝热压缩。
4.
ULTRASONIC VELOCITY AND ATTENUATION COEFFICIENT, DENSITY AND ADIABATIC COMPRESSIBILITY OF PETROLEUM ETHER UNDER HIGH HYDROSTATIC PRESSURE
石油醚在流体静高压下的超声声速、衰减、密度和绝热压缩系数
5.
This paper describes the reason of adiabatic compression produced and its harm to the dissolved acetylene production. The measures to prevent accidents are also given in this paper.
介绍了绝热压缩产生的过程对溶解乙炔生产的安全影响以及有关预防措施。
6.
testing method for compressive strength of insulating fire bricks
绝热耐火砖耐压缩强度试验方法
7.
Adiabatic Pulse Compression in Dispersion Decreasing Fibers
色散渐减光纤中的绝热脉冲压缩研究
8.
Adiabatic pulse compression using the silicon-based high nonlinearity-increasing fiber;
硅基高非线性递增光纤的绝热脉冲压缩研究
9.
Thermodynamical Analysis on Unsteady-StageConditions of Piston Compressors─The Adiabatic Suction and Isothermal Discharge Model
活塞式压缩机的变工况的热力学分析──绝热吸气、等温排气模型
10.
electric insulating compressed asbestos fibre
电绝缘压缩石棉纤维
11.
thermodynamics of compressible fluid flo
可压缩流体流动热力学
12.
testing method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
绝热耐火砖线膨胀收缩率试验方法
13.
testing method for reheat shrinkage of insulating fire bricks
绝热耐火砖重烧收缩率试验方法
14.
Method to Reduce Shrinkage of Insulation in LV/MV XLPE Cables
减少中低压交联电缆绝缘收缩的方法
15.
automated adiabatic bomb calorimeter
自动绝热压力罐式量热计
16.
Experiment on Two-stage Compression Air-source Heat Pump Water Heater
两级压缩空气源热泵热水器实验研究
17.
Prospect of High Voltage Long Distance Compressed-air Insulated Transmission Lines
高压长距离压缩空气绝缘输电线路的发展前景
18.
RESEARCH ON ISOTHERMAL COMPRESSION AND HOT EXTRUSION TECHNOLOGY SPRAY FORMED 60Si-40Al ALLOY
喷射成形60Si-40Al合金热压缩与热挤压工艺研究