1.
Study on Outer Circle Grinding Accuracy with Large Dimensions on Fixing Sustain Devices
固定支承上大尺寸外圆磨削精度的实验研究
2.
The dead center, being a stationary bearing point, must be lubricated.
由于是固定的支承点，死顶尖必须润滑。
3.
Replace the front strut upper mount and bearing
更换前支柱上固定座与轴承
4.
Four boundary conditions, such as fixed clamp, moving clamp, hinge support and simple support, are considered.
文中考虑了固定夹紧、移夹紧、支承及简单支承等4种边界条件.
5.
"Often one of the members is fixed, and the Bearing acts as a support for the moving member."
往往其中一个构件固定,轴承起支承运动件的作用。
6.
stationary barrier
固定支架，固定挡块
7.
natural frequency of rotor/bearing system
转子支承系统固有频率
8.
Stability and Critical Flow Velocity Analysis of a Clamped Pipe Conveying Fluid with Intermediate Support
一端固定具有中间支承输流管道临界流速及稳定性分析
9.
BRACKET MOUNTING NUTS
支架固定螺帽（2）
10.
"In most cases, the engine is supported by the frame at three or four places."
在大多数情况下,发动机用三个或四个支承点与车架固定在一起。
11.
To pay a fixed sum in order to have the right to collect and retain profits from(a business, for example).
承包支付固定金额，以有权从（如商业）中收集和保有利润
12.
The Dynamic Analysis of the Fixed Crane's Supporting Cylinder under the Condition of Revolving System's Braking
固定式起重机支承圆筒回转制动过程的动力学分析
13.
Characteristic and stability of supported beam under axial force
轴向力作用两端支承梁的固有特性和稳定性分析
14.
fixed charge coverage
固定支出范围,固定支出类别
15.
Fixed Rate Bankers' Acceptances
固定利率銀行承兌匯票
16.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
17.
During steering maneuvers, the strut and the steering knuckle (through the ball joint and a pivot bearing in the strut's upper retainer) turn as an assembly.
车辆转向时，支柱以及转向关节（经由球形接头与上支柱固定器之轮毂轴承）会一体旋转。
18.
EVAP Canister Mounting Nuts (canister-to-mounting bracket)
EVAP罐固定螺帽（罐到固定支架）