1.
New Technology for Preparing Semi-Solid Billets of LC9 Aluminum Alloy
LC9铝合金半固态坯料制备工艺研究
2.
Experimental Study on Fabrication of Semisolid Billet of AlSi30 Alloy Based on New SIMA Method
基于新SIMA法的AlSi30合金半固态坯料制备试验研究
3.
Preparation of Mg-Al Series Magnesium Alloy Semi-solid Billets and its Thixo-extrusion Forming
Mg-Al系镁合金半固态坯料制备及触变挤压研究
4.
The FEM Research and Technical Parameters Optimizing of the Process of AlSi9Mg Alloy Semi-solid Billet Production;
AlSi_9Mg合金半固态坯料制备有限元分析及工艺参数优化
5.
Research on Semi-Solid Billet of 6061 Aluminium Alloy by Sima and Its Thixo-Forming;
变诱导法铝合金（6061）半固态坯料制备及触变成型研究
6.
Process research on preparation of aluminum alloy die-forging blank with right-angled bends on both sides
两侧带直角弯的铝合金模锻件坯料制备工艺研究
7.
Preparation and Reheating of Al/Mg Alloy Semisolid Billet for Double-layer Tube
双层复合管用Al/Mg合金半固态坯料制备及加热研究
8.
Preparation of Al_2O_(3p)/Al-Cu Matrix Semi-solid Billet
Al_2O_（3p）/Al-Cu基半固态坯料的制备
9.
Preparation of TiC/7075Al Matrix Semi-solid Billet
TiC/7075Al基半固态坯料的制备
10.
Preparation of Semi-solid AlSi30 Billets by SIMA Method
基于SIMA法的AlSi30合金半固态坯料的制备
11.
Study on Semisolid Feedstock of A356 by Controlled Pouring Methods;
控制浇注方法制备A356半固态坯料的研究
12.
Preparation of Semi-solid Billet and Reheating of Hypoeutectic Al-Si Alloy;
亚共晶铝硅合金半固态坯料的制备及二次加热
13.
Study on Process of High Speed Steel Ingots Using Inclined Slope Pre-crystallization Method;
斜坡预结晶法制备高速钢坯料的工艺研究
14.
Study on Preparation of AlSi7Mg Alloy Semi-solid Billets by Melt Isothermal Treatment Process;
熔体等温处理法制备AlSi7Mg合金半固态坯料的研究
15.
The Technology Research of Semi-solid Forming Pulps and Ingot Which are Made by Strong Cooling with Single-tube
单管强冷制备半固态成形浆料及坯料的工艺研究
16.
blank of iron or steel for bolts
螺栓坯料，铁或钢制的
17.
Study on Compound Fabrication of Semi-solid Billet of Near-eutectic Al-Si AlloyBased on SIMA Method;
基于SIMA法的近共晶点铝硅合金半固态坯料复合制备研究
18.
Research on the Making of Semi-Solid Billet of AZ91D Magnesium Alloy by Direct Extrusion-ECAP;
正挤压—等径道弯曲制备AZ91D镁合金半固态坯料研究