1.
Lower temperature aluminium reduction practices of SY300kA pre-baked anode cell
SY300kA大型预焙电解槽在较低温度下电解生产的实践
2.
Discussion on the technology of increasing the current of large prebaked cell
大型预焙铝电解槽强化电流技术探讨
3.
In-depth Characteristics Extraction of Cell Voltage Fluctuation in Aluminum Reduction Cells
大型预焙铝电解槽槽电压波动特征提取
4.
Study on Design and Optimization of the Electric-Magnetic Field of Large Prebaked Aluminum Reduction Cells;
大型预焙铝电解槽电磁场设计与优化研究
5.
The Simulation of the Thermal-electric Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽热电场的仿真
6.
The Simulation of the Electromagnetic Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽电磁场的仿真
7.
The Research on Optimize of Large Pre-baked Anode Cell Process Technical Conditions;
大型预焙铝电解槽工艺技术条件优化试验
8.
Research on Technology Innovation and Application of 200kA Large Prebaked Anode Aluminum Reduction Cell;
200kA大型预焙铝电解槽技术创新与应用的研究
9.
Practice on Energy Saving Process for Second Startup of Large Pre-Baked Aluminum Smelting Pot
大型预焙铝电解槽二次启动方法的实践
10.
open prebaked anode type cell
敞开式预焙阳极电解槽
11.
Summary of EPC installation project of electrolytic aluminum improvement on pre-roasting cells at Lanzhou Aluminum Plant;
兰铝大型预焙槽电解铝技改项目安装工程总承包总结
12.
Application and Practice of the Large-scale 306KA Prebaked Aluminum Reduction Cell with Integrated of Energy-saving Measures
306KA大型预焙阳极铝电解槽综合节能措施的应用实践
13.
Analysis on Heat Balance Characteristics under Lower Molecular Ratio and Control for 180 kA Heavy Pre-baking Aluminum Smelting Pot
浅析180 kA大型预焙铝电解槽低分子比下的热平衡特性与控制
14.
Study on the Life of GL 190kA Prebaked Aluminum Reduction Cells;
GL190kA预焙铝电解槽槽寿命问题研究
15.
Spectral analysis of cell voltage fluctuation in 320 kA pre-baked aluminum reduction cells
320kA系列预焙铝电解槽槽电压波动的频谱解析
16.
The Study of the Enlarge of Current in 160KA Cell;
160KA预焙铝电解槽强化电流试验研究
17.
Technique code for retrofitting soderberg cell into prebaked anode cell in aluminium smelters
自焙阳极铝电解槽预焙化改造技术规范
18.
The Research of Fault Diagnosis System for 350kA Pre-baked Aluminum Reduction Cell;
350kA预焙铝电解槽故障诊断系统的研究