1.
Analysis and Measure of Prick Gear Carburizing Quenching Distortion of Automobile Rear Bridge
汽车后桥被动锥齿轮渗碳淬火变形分析与对策
2.
The Carburization Quenching Distortion Rule and Mechanism Study of a New Kind of Micro-distortion and High Strength High Toughness Bainitic Steel;
新型微变形高强韧贝氏体GDL-1钢渗碳淬火变形规律的探索
3.
The inner stress produced by quick cooling during quenching is the basic reason of formation of quench-distortion of parts.
淬火过程中的快速冷却在工件内部产生的内应力是导致淬火变形的根本原因。
4.
Control of Distortion for Large and Thin Quenching and Tempering Steel Plate after Cold Pressing Quenching
大型薄形调质钢板热处理冷压淬火畸变控制
5.
Simulation of deformed area for pre-stretching aluminum alloy thick plates
淬火铝合金厚板预拉伸变形区域仿真与分析
6.
Hardening means making harder .
淬火就是促使变硬。
7.
06Cr13 Plastic Deformation Characteristics in High-temperature and Microstructure Analysis under Different Quenching Temperature
06Cr13高温塑性变形特性和不同淬火温度下的组织分析
8.
Effect of Pre-deformation and Quenching Agent on Intergranular Corrosion Resistance of High-strength Aluminum Alloys
预变形及淬火介质对高强铝合金抗晶间腐蚀性能的影响
9.
"ausform: To subject (especially steel) to deformation, quenching, and tempering to improve its wear properties."
奥氏形变法炼钢:使(尤指钢)在经受形变后淬火和回火以增加抗磨损性。
10.
Anneal means make harden steel soft and remove brittleness.
退火就是使淬火钢变软并消除其脆性。
11.
Nonuniform agitation/ quenching or nonuniform circulation of quenchant around a part results in an assortment of cooling rates that creates shape distor? tion.
搅拌/火不一致或部件周围淬火剂分布不均都可导致冷却速度不一而产生形变。
12.
Study on the Bainite Morphology of ADI
等温淬火球铁贝氏体组织形态的研究
13.
The Application of SIMATIC S7-300 PLC in Circular Quenching Furnace for Wheel
SIMATIC S7-300 PLC在车轮环形淬火炉中的应用
14.
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 40Cr Steel
40Cr钢“零保温”奥氏体逆相变淬火
15.
Analysis of abnormal distortion of driven bevel gear after carburizing and hardening
从动锥齿轮渗碳淬火后异常畸变分析
16.
Abstract: The basic characteristics of hot_isostatic press quenching method and its excellent performances on decreasing part deformation are described in this paper.
文摘:叙述了热等静压淬火方法的基本特点以及在减小零件变形方面的优良性能。
17.
Successive Induction Heating and Hardening Process Research on Gear Copy Profile
齿轮仿齿形连续感应加热淬火工艺研究
18.
Research on Deformation Heat Treatment of Heavy Die Standard Piece
大型模具标准件的拉拔并淬、回火成形研究