1.
Study on Temperature Field of the Transfer Roller in Hot Strip Mill by FEA;
热连轧输送辊道温度场的有限元分析
2.
The Application of Flame Spray Welding Technology in CSP Running Table
火焰热喷焊技术在CSP输送辊道上的应用
3.
gravity roller carrier
重力运输机, 辊子输送器
4.
Structure Parameter Design for Gravity Brake-rollers;
重力式辊筒输送机制动辊的结构参数设计
5.
Welded steel pipe for supporting roller of belt conveyer
GB/T13792-1992带式输送机托辊用电焊钢管
6.
Analysis of Service Life of Belt Conveyor Idler
提高带式输送机托辊使用寿命的分析
7.
Belt conveyor idlers-Basic parameters and dimensions
GB/T990-1991带式输送机托辊基本参数与尺寸
8.
Supporting roll is one of the main parts on belt conveyer.
托辊是胶带输送机的主要基础部件之一。
9.
Determination of the roller interval in straight section for pipe belt conveyor
圆管带式输送机直线段托辊间距的确定
10.
Change and Design of Belt Conveyor Chute General Idler Stands
带式输送机导料槽处普通托辊架改造及设计
11.
Discussion on the idler pitch of belt conveyor based on the service life of bearing
基于轴承寿命下的带式输送机托辊间距探刮
12.
draw-off roller
牵引辊,送出罗拉,引出辊,出布辊
13.
The main products of this corporation are rollers, motorized pulleys and components for bulk handling.
经营范围为生产、销售托辊、电动滚筒和皮带输送机的配套产品。
14.
Failure Research of the Inputting Shaft for the High Speed Wire-rod Finishing Mill in Chang Gang;
长钢高速线材精轧机夹送辊输入轴断裂失效研究
15.
Discussion on Selection and Operation of Drag Coefficient Value for Belt Conveyor Idler
带式输送机托辊选用与运行阻力系数取值的探讨
16.
Note: We not only supply complete air supported belt conveyor but also supply main machine with some parts forthe improvement of ordinary belt conveyor.
注：该产品可整机供货。也可只供主机及部分部件，用于托辊胶带输送机的改造。
17.
Continuous mechanical handling equipment--Belt conveyors with carrying idlers--Calculation of operation power and tensile forces
GB/T17119-1997连续搬运设备带承载托辊的带式输送机运行功率和张力的计算
18.
idle roller conveyor
无驱动力辊筒运输机