1.
Trochoid-path-based FEM simulation for high-speed milling of aluminum alloy
基于次摆线轨迹的铝合金高速铣削有限元仿真
2.
A curve traced by a point on or connected with a circle as the circle rolls along a fixed straight line.
旋转线，次摆线圆在固定直线上滚动时，圆上一点或与圆相连的一点的弧形轨迹
3.
The cord shall withstand weight of500 gram, it swings from left to right at an angle of120 degree2000 times, the cord should no damage.
输出线末端加500的砝码，从左到右以120度的夹角摇摆2000次，输出线应无损坏。
4.
Swing Up and Stability Intelligent Control of Linear Single Inverted Pendulum
直线一级倒立摆的起摆及稳摆的智能控制
5.
Nonlinear Solutions to Vibration Period of Trilinear Pendulum with Non-parallel Wires
非平行摆线三线摆振动周期的非线性解
6.
This problem is to find a curve along which a pendulum takes the same time to make a complete oscillation.
这个问题是求一条曲线，使得一个摆沿着它作一次完全的振动，都取相等的时间。
7.
The meetings were helpful. At the first meeting, "dark clouds bearing down on the city threatened to crush it", as the reactionary bourgeois line in journalism asserted itself.
会是开得好的，第一次黑云任城城欲摧，摆出了反动的资产阶级新闻路线。
8.
cycloidal gear reducing motor
摆线齿轮减速电动机
9.
rotary piston engine of trochoidal type
余摆线型转子发动机
10.
rotary combustion engine of trochoidal form
余摆线型旋转式内燃机
11.
rotary piston engine of epitrochoid desig
外余摆线型转子发动机
12.
cycloid gear hydraulic motor
摆线齿轮油液压马达
13.
cycloidal planetary gear speed reducer
摆线式行星齿轮减速机
14.
general epicycloid circular arc spur gear
普通外摆线圆弧直齿轮
15.
cycloidal-pin wheel planetary gearing mechanism
摆线针轮行星传动机构
16.
Parametric Design of Three-ring Cycloid Pin-wheel Planetary Transmission Reducer
摆线针轮行星传动减速器摆线轮参数化设计
17.
Swing-Up and Stabilization Research and Design of a Cart-Pendulum Control System;
直线一级倒立摆起摆与稳摆控制研究及控制系统设计
18.
For this reason the cycloid is called the tautochrone.
由于这个缘故，摆线又叫做等时曲线。