1.
The Distribution of Normal Deviation for Fitting the Plane Linear in Old-Highway and Control in Fitting Precision
旧路平面线形拟合法线偏差分布规律及拟合精度的控制
2.
The Research of Computer-aided Fitting Technology on Old Highway Plane Curve
旧路平面线形计算机辅助拟合技术研究
3.
Analysis of Fitting Method on Plan Curve Based on Cubic Spline;
基于三次样条曲线拟合公路平面线形方法研究
4.
Research on Fitting Method of Road Horizontal Alignment Based on LIDAR Data
基于LIDAR数据的道路平面线形拟合方法研究
5.
Fitting Technology of Existing Expressway Longitudinal Section Alignment
既有高速公路纵断面线形的拟合技术
6.
Study on Subsection Fractal Interpolation for Plane Curve Fitting;
分段分形插值对平面曲线拟合的研究
7.
Simplified Endogen Force Computation of Planar and Curved Beam Based on Curve Fitting;
基于曲线拟合的平面弧形梁内力简化计算
8.
This article makes an introduction on the geometric design in horizontal and vertical alignments and the combined design of the two for top class highways.
介绍高等级公路平面线形设计、纵断面线形设计,以及平、面线形的组合设计。
9.
Fitting Conic to Scattered Data in a Plane
平面上散乱数据点的二次曲线拟合
10.
SMOOTHING AND FITTING THE MEASURED DATA OF PLANE CAM PROFILE
平面凸轮廓线实测数据的光顺及拟合
11.
The Closed-traverse Method in the Plane Alignment Design of Interchange;
立交匝道平面线形设计的闭合导线法
12.
Study of applicability of curve fitting methods in small settlement of subgrade
曲线拟合法对路基小变形情形适用性研究
13.
Review on curved design method of mountain highway horizontal alignment
山区公路平面线形曲线型设计方法综述
14.
Combined with the alignment design of Taichang Expressway, the paper introduced some experience of horizontal and longitudinal alignment combination.
结合太长高速公路线形设计,对平面设计与纵面设计的组合谈一些体会。
15.
The method fitting highway alignment based on the least squares analysis
基于最小二乘法的高速公路线形拟合方法
16.
Surveying and Line Fitting Method of Road Rehabilitation and Expansion Project
公路修复扩建工程测量及线形拟合方法
17.
Research on the NURBS Curve Fitting for Tool Path Generation
面向刀具路径生成的NURBS曲线拟合算法研究
18.
Complex Vortices Formed by Coaxial Superposition of Circular and Planar Vortices
环形与平面光学涡旋共线叠加的复合涡旋