1.
Interaction between offset parallel cracks and combination conditions
平行偏置裂纹相互作用及其合并条件
2.
On Influence of Welded Joint on Fracture Parameter with Crack in Different Location
裂纹位置对焊接接头断裂参量的影响
3.
Investigation of Fatigue Crack Deflection for A357 Casting Aluminium Alloy
A357铸造铝合金疲劳裂纹偏折研究
4.
The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.
裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。
5.
The Causes of Crankshaft Offset Grinding and Grinding Crack and Their Solutions;
曲轴偏磨与磨削裂纹的成因及解决办法
6.
Except for a small length of web at the first fracture location, none of the cracks exhibited a brittle fracture mode of crack propagation.
除第一个断裂位置的一小段腹板外，没有一条裂纹显示出裂纹扩展的脆性断裂模式。
7.
The position of the last crack is marked before unloading the beam.
标出最后一条裂纹的位置，然后卸去载荷。
8.
Analysis of Crack on the Pipeline of ARDS Reactor and Safety Measure
加氢装置反应器管线裂纹分析及安全对策
9.
Corrosion Resistance of Bellow Materials for Catalytic Cracking Unit
催化裂化装置用波纹管材料的耐蚀性能研究
10.
Study on Method and Equipment for Detecting Casting Defects Based on Audio Frequency Inspection;
铸件裂纹缺陷音频检测方法与装置研究
11.
Study of Using Biaxial Prestressing to Control Welding Distortion and Prevent Hot Cracking;
双向预置应力控制焊接变形及防止热裂纹研究
12.
Effect of Position of Ultrasonic Excitation Source on Thermosonic Image of Cracks
超声源的位置对激发裂纹热成像的影响
13.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
14.
FAILURE ANALYSIS OF BELLOW EXPANSION JOINT IN HYDROCRACKING UNIT
加氢裂化装置中波纹管膨胀节失效分析
15.
The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
16.
Detailed siress analysis was carried out for a section of the pipeline including an eccentric reducer on which long cracks appeared twice.
进而对曾两次出现长裂纹的偏心异径管管段进行细部应力分析。
17.
Influence of Solute Segregation on Crack Susceptibility at Solidification Front of Continuous Casting Strand
溶质偏析对连铸坯凝固前沿裂纹敏感性影响的研究
18.
seal-split cowhide bag
海豹纹理状裂纹牛皮袋