1.
On Strengthening the Openings in the Floors of CSR Bulk Carriers' Cargo Hold
CSR散货船货舱实肋板上开孔加强的研究
2.
circular openings not requiring reinforcement
不要求补强的圆形开孔
3.
welded reinforcement of nozzle opening
接管开孔的焊接补强
4.
Development of ANSYS Stress Design System For Large opened Strengthen Structure
开孔补强结构的有限元ANSYS平台开发
5.
RESEARCH ON THE PROCESS,INTENSITY AND PORE SIZE CONTROL OF POROUS CERAMICS BY SPACE-HOLDER METHOD
添加造孔剂法制备多孔陶瓷及其强度与孔径控制
6.
Front and rear reinforcing post will have shelf-clip adjustment holes at1/2- inch increments.
前、加强筋上每隔1/英寸有隔板调节孔。
7.
Strength and Buckling Analyses of Ship Girders with Cutout
船体桁材开孔后的强度和稳定性研究
8.
Stress Concentration of Special Holes in Ship Girder and Their Reinforcements;
强梁腹板特殊开孔应力分析与补强方法的研究
9.
Fifth, we intensified efforts to help the rural poor improve their lot through development.
五是加强农村扶贫开发。
10.
Cracking Analysis of CrWMn Steel Piercing Mould
CrWMn钢冲孔模具加工过程中开裂分析
11.
Open-cell foam properties of polypropylene with linear low density polyethylene
添加LLDPE的聚丙烯开孔发泡性能研究
12.
Effects of the Addition Agent on Endurace and Adsorptivity of Porous Zeolite Balls
外加剂对多孔沸石滤球强度及吸附性的影响
13.
Influence of Processing Methods for Plate Hole on Fatigue Strength of Roller Chain Plate
板孔加工方法对滚子链链板疲劳强度的影响
14.
D. Clean the slots of O-rings, Talfon slots, body spindle and spherical surface intensively.
形环沟槽，铁氟沟槽，主体轴心孔及球面加强清洗。
15.
3 Front and rear reinforcing post will have shelf-clip adjustment holes at 1/2-inch increments.
前、后加强筋上每隔1/2英寸有隔板调节孔。
16.
Reduced Computation of the Strength of Circular Hole Castellated Composite Beams with Stiffened Webs
计入加劲肋的圆孔蜂窝组合梁强度简化计算
17.
Deep Bore Precision Machining Based on Strong Dint Heng Whet Technology
利用强力珩磨工艺进行深孔的精密加工
18.
Finite Element Analysis of the Nozzle Reinforcement Structure of Internal Pressure Cylinder Vessel;
内压圆柱壳体开孔补强结构的有限元分析