1.
Test and Study on the Lining Structure of Single-Line Railway Tunnel under Geological Bedrock Unsmmetrical Loading;
单线铁路隧道地质顺层偏压衬砌结构的试验研究
2.
Lining Variation Analysis of Hallow-Buried and Unsymmetrical Pressure Tunnel;
浅埋偏压既有隧道衬砌变异影响因素分析
3.
Study on the Distribution Rule of Water Pressure upon Lining in Subject to High Hydraulic Pressure Mountain Tunnel
高水压岩溶隧道衬砌水压力特征研究
4.
A Study on Some Problems in the Calculation of Pressure Tunnel Lining
有压隧洞衬砌计算中几个问题的探讨
5.
Experimental study on eccentric compression behaviour of autoclaved flyash-lime brick masonry
蒸压粉煤灰砖砌体偏心受压性能试验
6.
The Experimental Study on the Capacity for Reinforced Concrete Masonry Columns Subjected to Eccentric Load;
配筋砌块砌体柱偏心受压承载力的试验研究
7.
Study on the Distribution Rule of Water Pressure Upon Lining in Subject to High Hydraulic Pressure Mountain Tunnel;
高水压山岭隧道衬砌水压力分布规律研究
8.
Researches on the Condition of Cavitation of Unlined Diversion Type Pressure Tunnel and the Stability of Surrounding Rock;
不衬砌有压引水隧洞成洞条件及围岩稳定研究
9.
Study on Work Behavior of Liner Structure of Underground Surge-chamber with High Side Wall;
高边墙地下调压室衬砌结构工作性态研究
10.
Reinforcement of High Pressure Bifurcation Based on Numerical Analysis
基于数值分析的高压岔管衬砌配筋计算
11.
Influences of Lining Stiffness Distribution on Frost Heave Pressure on Cold Regional Tunnels
寒区隧道衬砌刚度分布对冻胀压力的影响
12.
Finite element analysis on tunnel secondary lining with different coefficient of lateral pressure
不同侧压力系数隧道二次衬砌的有限元分析
13.
Scattering around a liner of arbitrary shape in saturated soil under dilatational waves
饱和土中任意形状衬砌对稳态压缩波的散射
14.
Discussion of method of calculating crack width of permeable lining of pressure tunnel
压力隧洞透水衬砌裂缝宽度计算方法探讨
15.
Elastic Stress Analysis of Hydraulic Pressure Tunnel with Single-and Double-Layer Reinforced Concrete Lining Structure
水工有压隧洞单双筋衬砌结构弹性应力分析
16.
Stochastic finite element analysis of surrounding rock and lining of tunnels under external water pressure
外水压下隧道围岩与衬砌的随机有限元分析
17.
The application of pressed grouting bolt in the project segment support lining
压力注浆锚杆在某工程管片支护衬砌中的应用
18.
Design on hydraulic slide forms for lining works of tail-race surge shafts of Three Gorges underground powerhouse
三峡地下厂房尾水阻尼井衬砌液压滑模设计