1.
Bolt Broken Cause Analysis and Improvement for Railway Wagon Core Plate
铁路货车心盘螺栓松动折断原因及改进
2.
Equivalent Model and Its Wind Vibration Analysis of Transmission Tower Structures on the Bolted Looseness;
输电塔法兰联接节点螺栓松动等效模型及风振响应分析
3.
Loosen oil pan bolts and remove the front bolt at each side.
松动油底壳螺栓，拆下每一面的前螺栓。
4.
a bolt shaking loose in an engine
发动机上震松的螺栓
5.
Inspect crankshaft, flexplate/flywheel and bolts for damagTighten to correct torque
检查曲轴、活动板/飞轮和螺栓是否松动。拧紧螺栓以校正扭力。
6.
follower stud and unt
从动板柱螺栓及螺母
7.
Remove the upper flywheel and converter housing bolts and loosen the bottom bolts.
拆卸上部飞轮及转换器外壳螺栓，拧松底部螺栓。
8.
SLN self-locking nuts
SLN自动防松螺帽
9.
starter terminal stud
起动机线头接柱螺栓
10.
After loosening bolts with a 9/16" socket, remove bolts completly.
在用9/16英寸套筒松开螺栓后，将螺栓完全拆卸下来。
11.
Remove the upper engine flywheel/converter housing bolts and loosen the bottom bolts.
卸去上端引擎飞轮/转换器壳体螺栓，并拧松底部螺栓。
12.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
13.
This can be examined by temporarily loosening the mounting bolts and test-run the system to look for any reductions in the noise.
这些可以通过临时松动丝杠支撑座的固定螺栓查看噪音是否下降以得到确认。
14.
Loosen the coolant pump pulley bolts while the belt is still tight.
在皮带仍然紧时，放松冷却水泵滑轮螺栓。
15.
Using a wrench, loosen the diaphragm assembly by turning the hex bolt counterclockwise.
用扳手反时针方向旋转六角螺栓，松开隔膜总成。
16.
The Stress Relaxation of Tight Bolt Connection under a High Temperature;
高温环境下紧螺栓联接设计的应力松弛问题
17.
warm up a connection
敲击螺纹接头使之松动
18.
a loose tooth, thread, screw
松动的牙齿、 线、 螺钉.