1.
By simulative damage detection to the plane truss, it proves the feasibility of the methods of damage detection based on the flexibility difference curvature.
通过对平面桁架的模拟损伤识别,证实了基于柔度差值曲率法的损伤定位方法的可行性。
2.
DETECTION INDICTOR OF STRUCTURAL NONDESTRUCTIVE DAMAGE BASED ON CURVATURE-FLEXIBILITY-DIFFERENCE MATRIX
基于柔度差曲率矩阵的结构损伤识别方法
3.
For most damage cases, flexibility index is the best of the three indices in anti-noise and the curvature index is the worst.
(3) 对大多数损伤情况,柔度指标的抗噪性最好,曲率指标最差。
4.
Damage Identification of Simply-Supported Beam Bridges Based on Influence Line Curvature of Deflection Differential Values
基于挠度差值影响线曲率的简支梁桥损伤识别
5.
Approach of Bending Plate Structural Damage Detection Based on Flexibility Curvature Matrix
基于柔度曲率矩阵的曲面板结构损伤识别方法
6.
For precisely testing the damage of the steel truss, the method of the sudden change coefficient of the flexibility curvature was used.
为了对钢桁架结构的损伤情况进行比较准确的检测,应用了柔度曲率幅值突变系数法.
7.
A Study of Flexibility Curvature Matrix for Structural Damage Identification
基于柔度曲率矩阵的结构损伤识别研究
8.
Study on Plate Structural Damage Identification Based on Flexibility Curvature
基于柔度曲率的板结构损伤识别的研究
9.
bad rate tracing
差率不好的记录曲线
10.
The relative average error between predicted oil displacement efficiency and actual value is 8.7%, the accuracy meets demand of production.
驱油效率实际值与预测值平均相对误差8．7％，精度满足生产要求。
11.
It extracts angular point by means of wavelet transformed modulus maximum of several scales and curvature theory.
它利用在几个尺度上小波变换模极大值和曲率理论提取角点。
12.
amplitude verssus frequency response characteristic
幅度-频率特性曲线
13.
On Randers Metrics of Isotropic S-Curvature
具迷向S-曲率的Randers度量
14.
Evaluation of Uncertainty in Measurement for Fiducial Error of Indication of Conductivity Meter Verification Device
电导率仪检定装置示值引用误差的不确定度分析
15.
Evaluation of Uncertainty about Indication Error for Heart Rate Measuring Results of Digital Electrocardiographs
数字心电图机心率示值误差测量结果的不确定度评定
16.
Analysis of Inspection and Measuring Method for 120° Distributing Angle Errors of Crankshaft Crankpins
曲轴曲拐120°角度误差检测方法分析
17.
Research of Numerical Simulation on Flexible Bending Technology for 3-D Surface;
三维曲面柔性卷板成形过程的数值模拟研究
18.
Noise removal model based on Gaussian curvature and local variance
基于高斯曲率和局部方差的去噪模型