1.
Effect of injection parameters on residual stress of plastic long ruler
注塑工艺参数对塑料长尺残余应力的影响
2.
Influence Analysis of Injection Process Parameters on Sequential Overmolding Injection
注塑工艺参数对双色注射成型影响分析
3.
Research on the Ratio of ABS/PMMA Blends and Optimization of Experimental Injection Molding Process Parameters
ABS/PMMA配比研究及实验注塑工艺参数优化
4.
OPTIMIZATION OF INJECTION PROCESSING PARAMETERS BASED ON TAGUCHI AND UNIFORM DESIGN OF EXPERIMENT
基于Taguchi和UDE试验设计的注塑工艺参数优化
5.
Research on Robust Design of Craft Parameters in Plastic Injection Based on Relation Degree
基于关联度的注塑工艺参数稳健优化设计研究
6.
Optimizing the Injection Molding Process Parameters Based on Orthogonal Test and MoldFlow
基于正交试验及MoldFlow模拟优化注塑工艺参数
7.
Study on the Influence of Processing Parameter and Glass Fiber Content on Glass Fiber Reinforced Polypropylene Part Quality;
注塑工艺参数和玻纤含量对玻纤增强聚丙烯制品质量影响的研究
8.
Simulation of Injection Molding and Optimization of Molding Parameter for the Plastic Part with Complicated Structure
复杂塑件的注塑成型模拟及工艺参数优化
9.
Process Parameters Optimum of Injection Molding and Injection Mould Design of Plastic Gear
塑料齿轮成型工艺参数优化及注塑模具设计
10.
Optimization of Injection Mould and Rapid Setting of Processing Parameters of Injection Moluding Based on Numerical Simulation
基于数值模拟的注塑模具优化及注塑成型工艺参数快速设置
11.
Experiment Research on Influence of Processing Parameters on Part Quality in Injection Molding;
注塑成型工艺参数对制品质量影响的实验研究
12.
The Simulation of Injection Processes of an Injection-molded Part with a Thin Shell Feature and the Optimization of Processing Parameters;
薄壳件注塑成型的计算机模拟及工艺参数优化
13.
On-line Optimization and Detection of Process Parameters for Plastic Injection Molding Machine
塑料注射成形机工艺参数的在线优化与检测
14.
Influence of Technological Parameters on the Quality of Injection Parts
工艺参数对注塑件成型质量的影响分析
15.
Taguchi-based parameter optimization of injection molding process for plastic support member
基于正交法塑料支撑件注射工艺参数优化研究
16.
Effect of Processing Parameters on Product Quality of Dynamic Injection Moulding
工艺参数对动态注塑成型制品品质的影响
17.
Research on the optimization of injection molding process parameters based on sensitivity analysis
基于敏感性分析的注塑成型工艺参数优化
18.
Optimal Combination of Injection Molded Process Parameter Based on Warp
基于翘曲的注塑成型工艺参数优化组合