1.
Stiffness Matching Optimum Design of Multi-Stanchion Landing Gear Airplane;
多支柱起落架飞机支柱刚度优化匹配设计
2.
Effective Length Factor of Column in Eccentrically Braced Steel Frames with Semi-rigid Connections
偏心支撑半刚接平面钢框架柱计算长度系数
3.
Investigation of Wind Vibration of the Additional Columns Stiffness Ratio on the Mega-sub Controlled Structure
支撑柱刚度对新型有控结构的风振响应研究
4.
Rotational Stiffness of Plated Column Base and Effective Length of Columns
平板柱脚的转动刚度和柱的计算长度
5.
Excessive friction in strut upper bearing
支柱上轴承磨损过度
6.
AXIAL COMPRESSIVE STIFFNESS OF CYLINDRICAL,CONICAL AND LOOPED CARBON-TUBE NANOSPRINGS
圆柱、柱锥及回形碳管纳米弹簧的轴向刚度
7.
Effective Length Factor of Columns in Two Web and Top-seat Angle Semi-rigid Connected Steel Frames;
四角钢半刚性连接刚架柱计算长度系数
8.
The Experimental Research of the Role of Cylindrical Rigidity in the Ice-Induced Vibration;
柱体刚度对冰激振动影响的实验研究
9.
Optimal Analysis for Lateral Stiffness in Mid-highriseRC Frame Shearwall Structure with Special-shaped Columns;
中高层异形柱框剪结构抗侧刚度优化
10.
Rigidity Analysis of Stacker Based on ANSYS
基于ANSYS的堆垛机立柱刚度的分析
11.
The stiffness of the elements in this case would be that of a supporting pier or elastomeric bearing pad or a combination of these.
诸单元的刚度则是指支承墩的刚度或弹性支承垫板的刚度或这些的合成的刚度。
12.
Confirmation of Post Calculating Length of Salt Making Workshop and the Rigidity Ratio of Girder and Post
制盐厂房框架柱计算长度的确定及梁柱适宜刚度比
13.
Stiffness and Strength Criteria for Design of Buckling-Restrained Braces
屈曲约束支撑设计的刚度与强度准则
14.
Research on Effects of Rigidity of Beam or Column on Behavior of R.C Constructional Column with Cantilever Beam;
梁、柱刚度变化对挑梁下R.C构造柱受力性能的影响研究
15.
Effects of Slab Column-Cap on the Stiffness Coefficient of Equivalent Frame in Cast-in-Situ Hollow Flat-Plate Structures
板式柱帽对现浇空心板柱结构等代梁刚度系数的影响
16.
Pushover analysis for hybrid frame of SRC column-steel beam based on linear stiffness ratio of beam to column
基于梁柱线刚度比的型钢混凝土柱-钢梁混合框架静力弹塑性分析
17.
support pillar
支撑支柱/顶出支柱
18.
Method for calculating spur gear mesh stiffness
一种求解直齿圆柱齿轮啮合刚度的方法