1.
3-Dimensional Numerical Simulation for Surface Cracks in FGMs under Thermal/Mechacal Loading;
热/机械载荷作用下含半椭圆表面裂纹FGM的3D数值模拟
2.
Stress Intensity Factor of Semi-elliptical Surface Cracks By Finite Element Analysis
半椭圆表面裂纹应力强度因子的有限元计算分析
3.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
4.
The Experimental Analysis of the Correction Factor of the SIF for the Transverse Surface Semi-Elliptic Crack of a Axle
轴表面横向半椭圆裂纹应力强度因子修正系数的实验分析
5.
Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface
圆筒表面椭圆裂纹应力强度因子的数值研究
6.
Twisting fracture analysis on elliptical surface cracks for rubber-steel-ball bush
含椭圆表面裂纹橡胶-钢球支座在扭转载荷下的断裂分析
7.
Three-Dimensional Finite Element Analysis of SIFs of Elliptic Surface Crack in Dimple Fastener
埋头紧固件椭圆形表面裂纹应力强度因子的三维有限元分析
8.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
9.
Research on deformation of crack surface of rock masses under high confining compression
高围压下岩石椭圆裂纹面构型变化规律
10.
Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack
含表面裂纹圆柱壳体的热力耦合效应
11.
Analysis on Reasons of Surface Cracks Formation of S355 Round Tube Blank and Corresponding Countermeasures Taken
S355圆管坯表面裂纹成因及解决对策
12.
By using linear elastic theory, formulae for tangential stress on ellipse edge are derived.
根据线弹性理论,导出了椭圆裂纹边缘的切向应力的表达式。
13.
SCATTERING OF SH-WAVE BY INTERFACE CRACK AND NEIGHBOURING CIRCULAR CAVITY IN BI-MATERIAL VERTICAL HALF-SPACE
垂直半空间界面裂纹及附近圆孔对SH波的散射
14.
The spores are monolete, bilaterally symmetric, elliptic in polar view, and semiorbicular or reniform in equatorial view.
介蕨属孢子单裂缝,两侧对称,极面观为椭圆形,赤道面观为半圆形或肾形。
15.
Crack- A mark found on a wafer that is greater than0.25 mm in length.
裂纹-长度大于0.25毫米的晶圆片表面微痕。
16.
The Research on the Surface Cracks of Continues Rolled Round Billet for Alloy Steels with a Little V and Ti
含V、Ti微合金钢连轧圆坯表面裂纹的研究
17.
Dynamic Anti-plane Behaviors of an Semi-infinite Piezoelectric Medium with an Circular Cavity and an Crack Near the Surface;
半无限压电材料界面附近圆孔与裂纹的动力反平面特性
18.
a surface whose plane sections are all ellipses or circles.
截面都是椭圆或圆的表面。