1.
The Design Process and Method of the Trailing Arm Type Torsion Bar Girder Rearaxle
拖曳臂式扭杆梁后桥的设计流程和方法
2.
Research on Torsion Effect in Box Girder of Cable-Stayed Bridge with Single Tower and Single Cable Plane;
独塔单索面斜拉桥主梁扭转性能研究
3.
Torsion Design and Analysis of Curved Prestressed Concrete Girder Bridges;
预应力混凝土曲线梁桥抗扭设计分析
4.
The Simulation Analysis and Evaluation for K&C Characters of Beam-Twist and Multi-link Suspension;
扭转梁与四连杆悬架K&C特性分析及评价
5.
Coupled Bending and Twisting Vibration of Thin Walled Beam Bridges Excited by Horizontal Seismic Force with Nonlinear Damping
薄壁梁桥的强非线性弯扭耦合振动解析解
6.
Analysis of Torsional Moment to Oblique Separation Framed Tunnel Bridges by Finite Element Method of Plates and Beams
斜交箱形地道桥扭矩分析的板梁有限元法
7.
Study on the Bending and Torsion Deformation of Continuous Prestressed Concrete Curved Box-Girder;
预应力混凝土连续弯箱梁桥弯扭变形的研究
8.
Torsional Deformations and Their Critical Values for Long-span Bridges in Rail Transit
大跨度轨道交通桥梁扭转变形及其限值
9.
The Application of Cantilever Beam in the Replacement of the Steel Beam Memberbars on 49th Bridge of Jingshan Railway
悬臂梁在京山49号桥钢梁杆件更换中的应用
10.
The Research on Stability of the Combinational Bridge with Rigid Frame and Single-ribbed Tied Arch;
刚构—单肋系杆拱组合桥梁稳定性研究
11.
The Design and Research on Independent Suspension Drive Axle with a Single Trailing Arm and Two Transversal Torsion Bars;
单纵臂横扭杆独立悬架驱动桥设计研究
12.
Stability Analysis of Tied Arch Bridge Based on Link and Beam Mixed Finite Element
基于杆梁混合单元的系杆拱桥稳定性分析
13.
A new explanation of the rigid continuous girder method for determination of tensile force of rod of tied arch bridge
确定系杆拱桥吊杆力的刚性连续梁法算法
14.
Control and Its Optimization of the Bridge Induced and Wind Induced Vibration of Self-Stayed Crooked Rod on Bridge;
桥梁自立曲杆风致及桥致振动控制及其优化
15.
The continuous bridge after simply supported is the building type adopted in current bridge construction.
先简支后连续桥梁是现在桥梁施工采用的形式。
16.
Analysis of Arch and Beam Combination Modeling Experiment of 56m Tied Arch Bridge;
56m系杆拱桥拱梁结合部静力模型试验分析
17.
Design of Fully-welded Steel Plate Composite Truss Girders of Box Section Member Bar of Minpu Bridge Ⅱ,Shanghai
闵浦二桥箱形截面杆件全焊钢板组合桁梁设计
18.
Strut-and-tie Model in the Design of Bridge Structures
桥梁结构设计中拉压杆模型设计法的应用