1.
Study on autoclaved sand-lime brick masonry by bending tensile strength test
蒸压灰砂砖砌体弯曲抗拉强度试验研究
2.
Finite element ANSYS analysis method of bending casing collapsing strength
弯曲套管抗挤强度有限元ANSYS分析方法
3.
NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE
考虑抗拉强度及峰值后软化曲线非均质性的混凝土梁三点弯破坏过程数值模拟
4.
STUDY ON THE SPLITTING TENSILE STRENGTH AND FLEXURAL STRENGTH AND FLEXURAL TOUGHNESS OF STEEL FIBER REINFORCED CONCRETE
钢纤维混凝土劈拉及弯曲强度和韧性研究
5.
Residual Collapsing Strength Analysis of Bending Part Casing in Medium/Short Radius Horizontal Wells
中短半径水平井弯曲段套管剩余抗挤强度分析
6.
repeated bending stress strength
反复弯曲疲劳强度极限
7.
The results showed that the tensile strength, flexural strength and flexural modulus increased obviously with increase of amount of Mica.
结果表明,复合材料的拉伸强度、曲强度和弯曲模量随着云母用量的增加而提高。
8.
Experiment & Research on Mixed SIFCON Bending Tensile Performance;
混杂SIFCON弯曲抗拉性能试验研究
9.
Influence of Training with Secondary Load on Bending Fatigue Strength of Cranksh aft
次载锻炼对曲轴弯曲疲劳强度的影响
10.
For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.
对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。
11.
Flexural Behaviour and Strength of Cold-Formed Steel L-Headers
冷弯L型钢联箱的弯曲性能和强度研究
12.
Test method for cross-bending strength of porous ceramic
GB/T1965-1996多孔陶瓷弯曲强度试验方法
13.
Testing method for flexural strength of high performance ceramics
GB/T6569-1986工程陶瓷弯曲强度试验方法
14.
Test method for flexural strength of ceramic tiles
GB/T8917-1988陶瓷砖弯曲强度试验方法
15.
Test method for cross-bending strength of vitrified pipe
GB/T2833-1996陶管弯曲强度试验方法
16.
Standard of test method for bending load capacity of gears
GB/T14230-1993齿轮弯曲疲劳强度试验方法
17.
testing method for flexural strength (modulus of rupture) of high performance ceramics
工程陶瓷弯曲强度试验方法
18.
EXPERIMENTAL STUDY ON THE FLEXURAL STRENGTH OF FINE GRAIN ETHANOL MODEL ICE
细粒酒精模型冰的弯曲强度试验研究