1.
internal spur gear
内啮合圆柱齿轮，直齿内齿轮
2.
spur geared wheel reductor
外啮合圆柱齿轮式轮边减速器
3.
straight spur gear-on-gear pump
圆柱直齿[外啮合]齿轮泵
4.
Basic Meshing Principle of Double arc Gear with Circular Arc Trace
圆弧齿线双圆弧齿轮的基本啮合原理
5.
"In volute cylindrical gear, external gearing, minor modulus"
渐开线圆柱齿轮外啮合小模数
6.
"In volute cylindrical gear, external gearing, large modulus"
渐开线圆柱齿轮外啮合大模数
7.
Engagement and Finite Element Analysys of Double Circular Arc Gears;
双圆弧齿轮的啮合特性及有限元分析
8.
The meshing characteristics for the driving of the double circular arc vertical and inclined gears
双圆弧直、斜齿轮传动的啮合特性分析
9.
ANALYSIS OF ENGAGING GEARS WITH DOUBLECIRCULAR-ARC TOOTH PROFILESⅡ. CORRECTLY ENGAGING CONDITIONS AND PRIMARY RESEARCH OF INTERFERENCE
双圆弧齿轮传动的啮合分析 Ⅱ.正确啮合条件及齿形干涉浅析
10.
Analytical Method for Computing and Adjusting Contact Ratio of Non-circular Gear Pairs
基于啮合角函数的非圆齿轮重合度求解
11.
Method for calculating spur gear mesh stiffness
一种求解直齿圆柱齿轮啮合刚度的方法
12.
Theoretical and Experimental Research on Loaded Meshing of Involute Cylinder Worm-drive;
渐开线圆柱蜗杆传动承载啮合理论与实验研究
13.
Analysis of Improper Engagement of Zero Degree Arc Bevel Gear
航空发动机零度圆弧锥齿轮啮合不良原因分析
14.
Transmission Analysis of an Arc Teeth Synchronous Belt Considering the Complex Contact Conditions
复杂接触条件下圆弧齿同步带啮合传动分析
15.
The" Calendar Round" is like two gears that inter-mesh, one smaller than the other.
历法圆圈”就像两个互相啮合的齿轮，一个比另一个更小。
16.
The Optimization of Inner Meshed Gear Pump with Wedge and External Circle-arc and Its Envelope Teeth
楔块式外圆弧及其包络线内啮合齿轮泵的优化设计
17.
Finte Element Analysis of the Deformation at Concave arc on 91 Model Double circular arc Tooth Profile
91型双圆弧齿轮凹弧单点啮合变形的有限元分析
18.
Based on GA of the Double Arc Gear Meshing Characteristics and Finite Element Analysis of Stress;
基于GA的双圆弧齿轮啮合特性及应力的有限元分析