1.
Optimization of Constrained Multi-layer Routing Algorithm
一种有约束的多层布线通孔优化算法
2.
Numerical Simulation and Optimum Design of Piston in GQ89 DTH Hammer
GQ89型贯通式潜孔锤活塞仿真分析及优化设计
3.
Research of Application and Drilling Tool Optimization of Reverse Circulation Drilling Technique with Hollow-Through DTH Hammer
贯通式潜孔锤反循环钻进技术钻具优化及应用研究
4.
The target of optimization is to increase the 11tilization of routing resources, to reduce the height of channel and to cutclown the number of vias so that the global performance could be improved.
算法以提高布线区利用率、减小通道高度和减少通孔数为目标，实现总体性能的优化。
5.
The Parameters Optimization of the Reverse Circulation DTH Hammer and Studies on Its Drilling Technique;
全孔反循环潜孔锤参数优化及其钻进工艺研究
6.
Models to Estimate the Productivity of Horizontal Wells and Their Application to Optimization Designs on Segmented Perforations;
射孔水平井产能模型及分段射孔优化设计
7.
The kibble hole arrangement optimization of tunnel digging blasting of Daanshan mine
大安山矿巷道掘进爆破掏槽孔布孔优化
8.
Hole Parameters Elastic Optimization and Material Selection for Plate with Holes
开孔板孔形参数的弹性优化及材料选择
9.
Development of AutoCAD by VB for Parameterization Drawing Pass;
用VB开发AutoCAD进行参数化孔型优化设计
10.
Numerical Optimization of Iodine Injector Position for Chemical Oxygen Iodine Laser
氧碘化学激光入碘孔位置的数值优化
11.
Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.
复合网孔通风垫能用于流（）料仓和料斗里的粉末和碎末产品，并使其流动速率最优化.
12.
Ventilation Model Tests with Airflow Organization Optimization on HuHeHaoTe Hydropower Station Underground Main Building: (Closed Holes and Installed Rrelay Fan)
呼和浩特水电站地下主厂房通风气流组织优化模型试验：封闭吊物孔、安装接力风机
13.
Preparation of Al_2O_3 Catalytic Material with Run-through-macropore Network Structure
贯通孔道网络结构大孔Al_2O_3催化材料的制备
14.
The Optimal Design About the Trajectory of Non dig Guided Boring
非开挖导向钻进钻孔轨迹的优化设计
15.
Study on the Technology Parameters Optimization of Hydraulic Slotting Casing Perforation;
水力喷砂割缝射孔工艺参数优化研究
16.
Optimum Design Roll Passes of Rolling No.20 Angle Iron Through Medium Section Mill;
中型轧机轧制20号角钢孔型优化设计
17.
The Multi-Objective Optimal Pass Design Based on GA;
基于遗传算法的棒材孔型多目标优化
18.
Optimized Pass Design System of Angle Steel and Finite Element Simulation;
角钢孔型优化设计系统及有限元模拟